mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 19:01:02 +00:00
SoftFever
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
128 lines
3.8 KiB
JSON
128 lines
3.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "9KnJva7m7E5M1quB",
|
|
"name": "Elegoo Neptune 2D 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
|
"host_type": "elegoolink",
|
|
"printer_model": "Elegoo Neptune 2D",
|
|
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
|
"extruder_colour": [
|
|
"#FCE94F",
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0",
|
|
"0x0"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"235x0",
|
|
"235x235",
|
|
"0x235"
|
|
],
|
|
"printable_height": "250",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"70",
|
|
"70"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"300",
|
|
"300"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"300",
|
|
"300"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.28",
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08",
|
|
"0.08"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"2",
|
|
"2"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%",
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"retraction_speed": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"deretraction_speed": [
|
|
"40",
|
|
"40"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"default_filament_profile": [
|
|
"Elegoo PLA @EN2 Series"
|
|
],
|
|
"machine_start_gcode": ";;===== date: 20240520 =====================\nT[initial_tool] ; set active extruder\n;M413 S0 ; disable Power Loss Recovery\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nG90 \nM83 ; extruder relative mode\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\nM420 S1 ; enable mesh - remove ; at beginning of line to enable\n;\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\n;\nG92 E0 ; reset extruder\nG1 E90 F600 ; load filament\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\n;\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n;",
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n;If prime tower is not enabled, perform the following refuelling G-Code.\n{if enable_prime_tower != true}G1 E-80 F2000 ; unload filament {endif}\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"change_filament_gcode": ";If prime tower is not enabled, perform the following refuelling G-Code.\n{if enable_prime_tower != true} \nM83\nG92 E0\nG1 E-5 Z{layer_z+0.4} F1200\nG1 E-85 F1200\nT[next_extruder]\nG93 E0\nG1 E90 F1200\n;\n{endif}",
|
|
"scan_first_layer": "0"
|
|
}
|