mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-11 01:41:03 +00:00
SoftFever
cd5b786704
# Description Adds Anker's own AnkerMake PLA+ filament line to the Anker vendor bundle: **Basic, Matte, Metallic, Silk, Glitter**. Until now the bundle only had `Generic PLA+ @Anker`. Each filament follows the existing Anker layout. A `@Anker base` profile (`instantiation: false`, inherits `Generic PLA+ @Anker base`, `filament_vendor: AnkerMake`) holds the settings. An instantiated `@Anker` profile holds only `compatible_printers`. `filament_id` and `setting_id` were minted with `scripts/orca_profile_tool.py generate-id`, and `Anker.json` was re-indexed with `update-index`. The Anker vendor version goes from `02.04.00.05` to `02.04.00.06`. ## Source of the values The values come from the AnkerMake filament profiles bundled with **eufyMake Studio** (Anker's PrusaSlicer 2.6 fork, AGPL-3.0, source at https://github.com/eufymake/eufyMake-PrusaSlicer-Release), in `profiles/Anker-ini/AnkerMake base/base.ini`. OrcaSlicer is also AGPL-3.0. Conversion notes: - PrusaSlicer keys are mapped to their Orca equivalents. For example, `bed_temperature`/`first_layer_bed_temperature` go to `hot_plate_temp*` and `textured_plate_temp*`, `fan_below_layer_time` goes to `fan_cooling_layer_time`, `slowdown_below_layer_time` goes to `slow_down_layer_time`, and `extrusion_multiplier` goes to `filament_flow_ratio`. Only keys that differ from the inherited `Generic PLA+ @Anker base` chain are written. - Where Studio sets retraction but leaves deretraction unset (Metallic, Silk), `filament_deretraction_speed` is set equal to the retraction speed. That matches Prusa's "0 = same as retract" meaning. - **Max volumetric speed is new.** Studio ships `filament_max_volumetric_speed = 0` (uncapped) for these filaments, and Orca has no equivalent. The caps were derived from the peak flow that Studio's own M5C "Fast" process pushes: Basic/Matte/Glitter 22 mm³/s, Metallic 20, Silk 13. Please treat these as the least-validated numbers in the PR. - Studio has pressure advance disabled for these filaments, so no PA values are carried over. - Colour variants are not included because they differ only in colour. `default_filament_colour` uses each family's base colour. - `compatible_printers` follows Studio's `compatible_printers_condition` for each family, limited to the 0.4/0.6 printers that `Generic PLA+ @Anker` covers: - Basic, Glitter: M5, M5 All-Metal, M5C at 0.4 and 0.6 - Silk: 0.4 on all three, plus M5C 0.6 and M5 All-Metal 0.6 (Studio excludes M5 0.6) - Matte, Metallic: 0.4 only (Studio restricts these to 0.4) - Studio also allows Basic on 0.2 nozzles. That variant is not added, because the 0.2 Generic profiles use a separate low-flow cap. # Screenshots/Recordings/Graphs N/A (profile-only change). ## Tests - `scripts/check_profile.sh` (local twin of the CI job, run against the full profile tree with the nightly macOS validator) passes all five checks: `profile_tool`, `validate_system`, `validate_slice`, `validate_filament_subtypes`, `validate_custom` (fixtures v1.9.0 to v2.4.2). - `python3 -m unittest discover -s scripts/tests -t scripts`: OK. - The submitter printed with these filament settings in eufyMake Studio on the M5C's stock brass 0.4 nozzle without issues. This Orca conversion has been loaded and sliced in Orca 2.4.2 (as user presets inheriting the Anker generic PLA+) but not yet printed on brass. The printer now has a different nozzle fitted. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts) 🤖 Generated with [Claude Code](https://claude.com/claude-code)