Alessandro Ranellucci 94ed6cd239 Always move Z at travel speed. #1093

2013-04-08 22:23:51 +02:00

..

ExtrusionPath

…

Fill

Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value

2013-03-17 01:10:40 +01:00

Format

…

GCode

Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071

2013-04-04 01:17:44 +02:00

Geometry

Safer safety_offset() for ExPolygons

2013-03-26 13:57:37 +01:00

GUI

Bugfix: configuration wizard led to crash with simple mode. #1077

2013-04-03 19:26:59 +02:00

Layer

Allow 0.1mm slots. #959 #1056

2013-04-04 01:24:40 +02:00

Print

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Config.pm

New wipe feature

2013-03-17 02:22:50 +01:00

ExPolygon.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Extruder.pm

New wipe feature

2013-03-17 02:22:50 +01:00

ExtrusionLoop.pm

…

ExtrusionPath.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Fill.pm

Refactoring: use the clone() method for inflating Surface objects

2013-03-29 19:18:06 +01:00

Flow.pm

Use full flow for sparse infill by default

2013-03-17 00:21:17 +01:00

GCode.pm

Always move Z at travel speed. #1093

2013-04-08 22:23:51 +02:00

Geometry.pm

split apart the math in nearest_point_index and short-circuit if we know the candidate is no good

2013-04-07 19:53:15 -04:00

GUI.pm

…

Layer.pm

…

Line.pm

…

Model.pm

…

Point.pm

…

Polygon.pm

Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049

2013-03-30 11:22:12 +01:00

Polyline.pm

Merge branch 'wipe'

2013-03-31 11:36:04 +02:00

Print.pm

Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071

2013-04-04 01:17:44 +02:00

Surface.pm

Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068

2013-03-29 19:24:08 +01:00

SVG.pm

…

Test.pm

Fix test framework detecting dE=0 as retraction

2013-03-18 18:01:01 +01:00

TriangleMesh.pm

Bugfix: horizontal projection for high-res models might show corrupted result

2013-03-17 15:39:51 +01:00