mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 02:41:17 +00:00
29 lines
1.5 KiB
JSON
29 lines
1.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_wanhao_d9_mk1_common",
|
|
"inherits": "fdm_wanhao_d9_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; clear the bed before homing\nG90\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle",
|
|
"machine_max_acceleration_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_e": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"500",
|
|
"500"
|
|
]
|
|
}
|