mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-28 11:21:30 +00:00
SoftFever
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
99 lines
2.7 KiB
JSON
99 lines
2.7 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Kingroon KP3S 3.0 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "J2s9iNvu2UoaIKJY",
|
|
"instantiation": "true",
|
|
"printer_model": "Kingroon KP3S 3.0",
|
|
"default_print_profile": "0.30mm Standard @Kingroon KP3S 3.0",
|
|
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\n M117 Purge extruder\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"enable_filament_ramming": "0",
|
|
"extra_loading_move": "0",
|
|
"fan_speedup_overhangs": "0",
|
|
"fan_speedup_time": "1",
|
|
"machine_max_acceleration_e": [
|
|
"10000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"10000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"10000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"4000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"4000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"1100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"50",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"300",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"300",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"30",
|
|
"12"
|
|
],
|
|
"manual_filament_change": "1",
|
|
"min_layer_height": [
|
|
"0.1"
|
|
],
|
|
"nozzle_type": "brass",
|
|
"parking_pos_retraction": "0",
|
|
"printable_area": [
|
|
"0x0",
|
|
"180x0",
|
|
"180x180",
|
|
"0x180"
|
|
],
|
|
"printable_height": "180",
|
|
"purge_in_prime_tower": "0",
|
|
"retract_length_toolchange": [
|
|
"0.5"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.3"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"3"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"support_air_filtration": "0",
|
|
"support_chamber_temp_control": "0",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"z_hop": [
|
|
"0.2"
|
|
]
|
|
}
|