mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 00:52:04 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
104 lines
8.1 KiB
JSON
104 lines
8.1 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Qidi X-Plus 4 0.4 nozzle",
|
|
"inherits": "fdm_qidi_x3_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Qidi X-Plus 4",
|
|
"gcode_flavor": "klipper",
|
|
"default_print_profile": "0.20mm Standard @Qidi XPlus4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"305x0",
|
|
"305x305",
|
|
"0x305"
|
|
],
|
|
"bed_exclude_area": [
|
|
"0x305",
|
|
"0x302",
|
|
"35x302",
|
|
"35x305",
|
|
"305x305",
|
|
"305x305",
|
|
"305x305",
|
|
"305x20",
|
|
"293x20",
|
|
"293x0",
|
|
"305x0",
|
|
"305x20",
|
|
"305x305"
|
|
],
|
|
"printable_height": "280",
|
|
"nozzle_type": "hardened_steel",
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"printer_settings_id": "Qidi",
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"deretraction_speed": [
|
|
"0"
|
|
],
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "{if max_layer_z < 12}\nG1 Z15 F1200\n{else}\nG1 Z{max_layer_z + 3.0} F1200\n{endif}\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nDISABLE_ALL_SENSOR\n{if long_retractions_when_cut[previous_extruder]}\nMOVE_TO_TRASH\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM400\n{else}\nG1 E-5 F{old_filament_e_feedrate}\n{endif}\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM400\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\nM106 S0\nM106 P2 S0\nUNLOAD_T[current_extruder]\nG92 E0\nM83\nG1 E2 F50\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[current_extruder]} WAIT=1\n{else}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[next_extruder]} WAIT=1\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\nM400\nM106 S60\n; FLUSH_START\nG1 E1 F50\nG1 E{65.5 * 0.58} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E{65.5 * 0.18} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E{65.5 * 0.18} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{if flush_length_1 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_1 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E{flush_length_1 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E{flush_length_1 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM104 S[new_filament_temp]\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nM109 S[new_filament_temp]\nG92 E0\nM400\nCLEAR_FLUSH\nCLEAR_OOZE\nM400\nM106 S0\nTOOL_CHANGE_END\nG1 Y305 F9000\nENABLE_ALL_SENSOR",
|
|
"is_support_multi_box": "0",
|
|
"machine_pause_gcode": "PAUSE",
|
|
"thumbnails": [
|
|
"272x272",
|
|
"96x96"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"4"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"4"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"20000"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20"
|
|
],
|
|
"retract_lift_below": [
|
|
"279"
|
|
],
|
|
"extruder_clearance_radius": "72",
|
|
"extruder_clearance_height_to_rod": "32",
|
|
"extruder_clearance_height_to_lid": "135",
|
|
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
|
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y290 F12000\nG0 X90 Y290 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
|
"time_lapse_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}",
|
|
"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
|
|
"thumbnails_format": "PNG",
|
|
"default_filament_profile": [
|
|
"Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle"
|
|
],
|
|
"printer_agent": "qidi"
|
|
}
|