Indy Jones b8dd2d3ca8 Fix start G-code: wait for nozzle temperature before purge line (#14120) ...

Several Artillery and Flashforge machine profiles set the first-layer nozzle temperature with M104 (set, no wait) immediately before the purge/prime line. The purge then runs before the nozzle reaches temperature, so filament is extruded through a nozzle that is not yet hot enough to melt it. Changed M104 to M109 so the printer waits for the target temperature before purging.

Affected profiles:
- Artillery Sidewinder X3 Plus / X3 Pro / X4 Plus / X4 Pro (0.4 nozzle)
- Flashforge AD5X (0.25/0.4/0.6/0.8)
- Flashforge Adventurer 5M / 5M Pro (0.25/0.8 overrides + shared fdm_adventurer5m_common, which also covers the 0.4/0.6 variants via inheritance)

Refs #4337

2026-06-20 20:16:37 +08:00

..

Afinia

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Anker

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Anycubic

Add profiles for the Anycubic Kobra S1 Max (#14017)

2026-06-05 20:59:34 +08:00

Artillery

Fix start G-code: wait for nozzle temperature before purge line (#14120)

2026-06-20 20:16:37 +08:00

BBL

Bambu Lab X2D 0.4 enable air filtration (#14090)

2026-06-08 15:44:10 +08:00

BIQU

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Blocks

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Chuanying

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Co Print

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

CoLiDo

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

Comgrow

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

CONSTRUCT3D

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Creality

Fixing the volumetric speed setting for some Creality filaments (#14237)

2026-06-16 18:16:01 -03:00

Cubicon

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

Custom

Updates for printer covers (#13660)

2026-05-15 20:44:33 -03:00

DeltaMaker

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Dremel

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Elegoo

Fix Elegoo CC2 layer stats G-code and missing Giga preset renamed_from (#14136)

2026-06-10 21:38:39 +08:00

Eryone

Feature/fix profile variants issus (#14084)

2026-06-07 17:46:53 +08:00

Flashforge

Fix start G-code: wait for nozzle temperature before purge line (#14120)

2026-06-20 20:16:37 +08:00

FLSun

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

FlyingBear

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

Folgertech

Updates for printer covers (#13660)

2026-05-15 20:44:33 -03:00

Geeetech

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Ginger Additive

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

InfiMech

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

iQ

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Kingroon

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

LH

Update LH Stinger profile (#13865)

2026-06-01 00:13:35 +08:00

LONGER

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Lulzbot

Updates for printer covers (#13660)

2026-05-15 20:44:33 -03:00

M3D

Fix an issue wipe_tower_filament is still set to 1 in some profiles

2026-06-08 14:23:28 +08:00

MagicMaker

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Mellow

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

OpenEYE

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

OrcaArena

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

OrcaFilamentLibrary/filament

Fix Elegoo CC2 layer stats G-code and missing Giga preset renamed_from (#14136)

2026-06-10 21:38:39 +08:00

Peopoly

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Phrozen

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

Positron3D

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Prusa

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

Qidi

feat: Support 3MF as g-code (use_3mf option) (#14238)

2026-06-17 15:39:40 +08:00

Raise3D

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Ratrig

Feature/fix profile variants issus (#14084)

2026-06-07 17:46:53 +08:00

re3D

Fix naming of re:3D cover pictures to match printer model. (#13907)

2026-05-29 00:25:47 +08:00

RH3D

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

RolohaunDesign

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

SecKit

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

SeeMeCNC

Fix SeeMeCNC Multicolor change (#14096)

2026-06-08 14:57:39 +08:00

Snapmaker

Fixing collisions during material changes on the Snapmaker U1 (#14097)

2026-06-08 14:51:17 +08:00

Sovol

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Tiertime

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Tronxy

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

TwoTrees

Reduce size by Json Fromatting (#13163)

2026-04-15 22:58:12 +08:00

UltiMaker

JD profiles from Marlin repo (#13241)

2026-04-16 21:19:16 -03:00

Vivedino

Reduce size by Json Fromatting (#13163)

2026-04-15 22:58:12 +08:00

Volumic

Reduce size by Json Fromatting (#13163)

2026-04-15 22:58:12 +08:00

Voron

Fix printer variant for voron 0.4 profiles (#14041)

2026-06-05 18:02:23 +08:00

Voxelab

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Vzbot

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Wanhao

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

Wanhao France

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

WEMAKE3D

Profile folder optimizations (Anycubic, Creality, Elegoo, Flashforge, Qidi, Prusa, Re3d, Rh3d, Snapmaker, Sovol and more) (#13149)

2026-04-26 20:17:08 +08:00

WonderMaker

Fix possible crash on startup because of low max volumetric speed on profiles (#13716)

2026-05-18 19:00:48 +03:00

Z-Bolt

fix: custom zbolt profile filament selection showing only @system (#13468)

2026-05-12 20:17:22 +08:00

Afinia.json

bump profile version

2026-05-22 02:27:34 +08:00

Anker.json

bump profile version

2026-05-22 02:27:34 +08:00

Anycubic.json

Add profiles for the Anycubic Kobra S1 Max (#14017)

2026-06-05 20:59:34 +08:00

Artillery.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

BBL.json

bump change vendor profiles version

2026-06-08 16:47:27 +08:00

BIQU.json

bump profile version

2026-05-22 02:27:34 +08:00

blacklist.json

Reduce size by Json Fromatting (#13163)

2026-04-15 22:58:12 +08:00

Blocks.json

bump profile version

2026-05-22 02:27:34 +08:00

check_unused_setting_id.py

…

Chuanying.json

bump profile version

2026-05-22 02:27:34 +08:00

Co Print.json

bump profile version

2026-05-22 02:27:34 +08:00

CoLiDo.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Comgrow.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

CONSTRUCT3D.json

bump profile version

2026-05-22 02:27:34 +08:00

Creality.json

Fixing process names and deleting old/duplicate processes of Creality Printers (#14085)

2026-06-07 22:57:57 +08:00

Cubicon.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Custom.json

Add more Polymaker filament presets (#13858)

2026-05-29 15:46:41 +08:00

DeltaMaker.json

bump profile version

2026-05-22 02:27:34 +08:00

Dremel.json

bump profile version

2026-05-22 02:27:34 +08:00

Elegoo.json

Fix Elegoo CC2 layer stats G-code and missing Giga preset renamed_from (#14136)

2026-06-10 21:38:39 +08:00

Eryone.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Flashforge.json

feat: Support 3MF as g-code (use_3mf option) (#14238)

2026-06-17 15:39:40 +08:00

FLSun.json

bump profile version

2026-05-22 02:27:34 +08:00

FlyingBear.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Folgertech.json

bump profile version

2026-05-22 02:27:34 +08:00

Geeetech.json

bump profile version

2026-05-22 02:27:34 +08:00

Ginger Additive.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

hotend.stl

…

InfiMech.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

iQ.json

bump profile version

2026-05-22 02:27:34 +08:00

Kingroon.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

LH.json

bump profile versions for those have changes

2026-06-07 21:25:10 +08:00

LONGER.json

bump profile version

2026-05-22 02:27:34 +08:00

Lulzbot.json

bump profile version

2026-05-22 02:27:34 +08:00

M3D.json

Fix an issue wipe_tower_filament is still set to 1 in some profiles

2026-06-08 14:23:28 +08:00

MagicMaker.json

bump profile version

2026-05-22 02:27:34 +08:00

Mellow.json

bump profile version

2026-05-22 02:27:34 +08:00

OpenEYE.json

bump profile version

2026-05-22 02:27:34 +08:00

OrcaArena.json

bump profile version

2026-05-22 02:27:34 +08:00

OrcaFilamentLibrary.json

Fix Elegoo CC2 layer stats G-code and missing Giga preset renamed_from (#14136)

2026-06-10 21:38:39 +08:00

Peopoly.json

bump profile version

2026-05-22 02:27:34 +08:00

Phrozen.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Positron3D.json

bump profile version

2026-05-22 02:27:34 +08:00

Prusa.json

Filament for features bump version (#14033)

2026-06-04 12:42:47 -03:00

Qidi.json

feat: Support 3MF as g-code (use_3mf option) (#14238)

2026-06-17 15:39:40 +08:00

Raise3D.json

bump profile version

2026-05-22 02:27:34 +08:00

Ratrig.json

bump profile versions for those have changes

2026-06-07 21:25:10 +08:00

re3D.json

bump profile versions for those have changes

2026-06-07 21:25:10 +08:00

RH3D.json

bump profile version

2026-05-22 02:27:34 +08:00

RolohaunDesign.json

bump profile version

2026-05-22 02:27:34 +08:00

SecKit.json

bump profile version

2026-05-22 02:27:34 +08:00

SeeMeCNC.json

Fix SeeMeCNC Multicolor change (#14096)

2026-06-08 14:57:39 +08:00

Snapmaker.json

bump change vendor profiles version

2026-06-08 16:47:27 +08:00

Sovol.json

bump profile version

2026-05-22 02:27:34 +08:00

Tiertime.json

bump profile version

2026-05-22 02:27:34 +08:00

Tronxy.json

bump profile version

2026-05-22 02:27:34 +08:00

TwoTrees.json

bump profile version

2026-05-22 02:27:34 +08:00

UltiMaker.json

bump profile version

2026-05-22 02:27:34 +08:00

Vivedino.json

bump profile version

2026-05-22 02:27:34 +08:00

Volumic.json

bump profile version

2026-05-22 02:27:34 +08:00

Voron.json

Fix printer variant for voron 0.4 profiles (#14041)

2026-06-05 18:02:23 +08:00

Voxelab.json

bump profile version

2026-05-22 02:27:34 +08:00

Vzbot.json

bump profile version

2026-05-22 02:27:34 +08:00

Wanhao France.json

bump profile version

2026-05-22 02:27:34 +08:00

Wanhao.json

bump profile version

2026-05-22 02:27:34 +08:00

WEMAKE3D.json

bump profile version

2026-05-22 02:27:34 +08:00

WonderMaker.json

bump profile version

2026-05-22 02:27:34 +08:00

Z-Bolt.json

Add more Polymaker filament presets (#13858)

2026-05-29 15:46:41 +08:00