OrcaSlicer/resources/profiles/Anker/machine/fdm_machine_common.json

{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "gcode_flavor": "marlin",
   	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 Sfirst_layer_temperature[0] ; Set hotend temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "M601",
    "extruder_colour": [
        "#018001"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "machine_max_acceleration_e": [
        "4000"
    ],
    "machine_max_acceleration_extruding": [
        "6000"
    ],
    "machine_max_acceleration_retracting": [
        "6000"
    ],
    "machine_max_acceleration_travel": [
        "6000"
    ],
    "machine_max_acceleration_x": [
        "6000"
    ],
    "machine_max_acceleration_y": [
        "6000"
    ],
    "machine_max_acceleration_z": [
        "100"
    ],
    "machine_max_speed_e": [
        "50"
    ],
    "machine_max_speed_x": [
        "600"
    ],
    "machine_max_speed_y": [
        "600"
    ],
    "machine_max_speed_z": [
        "80"
    ],
    "machine_max_jerk_e": [
        "18"
    ],
    "machine_max_jerk_x": [
        "15"
    ],
    "machine_max_jerk_y": [
        "15"
    ],
    "machine_max_jerk_z": [
        "0.3"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.05"
    ],
    "printable_height": "250",
    "retract_lift_below":[
        "249"
    ],
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_settings_id": "",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "retraction_minimum_travel": [
        "3"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retract_when_changing_layer": [
        "0"
    ],
    "retraction_length": [
        "1.5"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "default_print_profile": "0.20mm Standard @Anker",
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "60"
    ],
    "deretraction_speed": [
        "60"
    ],
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "use_relative_e_distances": "1",
    "wipe_distance": [
        "0"
    ],
    "wipe": [
        "0"
    ],
    "z_hop": [
        "0"
    ],
    "z_hop_types": "Normal Lift"
}