juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-09-27 10:51:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
b73e9df4f40d463be8c0dd0dabcfb6e238cea1d7
OrcaSlicer/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_start_gcode.json
T
SoftFever edc2f8bf90 Reapply "Sync Bambu Lab profiles with BambuStudio" 
This reverts commit b46916a8be.
2026-09-24 13:15:04 +08:00

7 lines
15 KiB
JSON
Raw Blame History

{
"type": "machine",
"name": "Bambu Lab X2D 0.4 nozzle template machine_start_gcode",
"instantiation": "false",
"machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== X2D start gcode==========\n;===== 2026/06/05 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n ;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M1012.1 T1100\n M620 M ;enable remap\n M622.1 S0\n G383.4\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n;===== reset machine status =================\n\n;==== set airduct mode ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S0 ; turn off auxiliary fan\nM106 P10 S255 ; turn on filter fan\n{else}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P10 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\n;M140 S0 ; stop heatbed from heating\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on auxiliary fan\nM106 P10 S102 ; turn on chamber fan\nM142 P6 R30 S40 U0.6 V0.8 ; set PLA/TPU/PETG exhaust chamber autocooling\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n;===== set chamber temperature ==========\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300 R\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n M972 S26 P0 C0\n G90\n M83\n G1 Y128 F30000\n G1 X128\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n\n M104 S0 T0\n M104 S0 T1\n M562 P1 E0 B1\n M562 P2 E0 B1\n M18 E\n M400 P200\n M1028 S1\n M972 S19 P0 ;heatbed detection\n M972 S31 P0 ;toolhead camera dirt detection\n M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 ;print plate deviation detection\n M1028 S0\n M562 P1 E1 B1\n M562 P2 E1 B1\n M17 D\n\n ;M400\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\n {if max_print_z >= 145}\n G151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-40} A ; rise temp in advance\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n M620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B ; switch material if AMS exist\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A B\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n G150.3\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_filament_id]}\n {if bed_temperature_initial_layer_single > 89}\n {if overall_chamber_temperature < 40}\n M1030 S1200\n SYNC R0 T1200\n {else}\n M1030 S600\n SYNC R0 T600\n {endif}\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n\n G91\n G1 Y-16 F12000 ; move away from the trash bin\n G90\n M400\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n;===== wipe left nozzle end =====\n\n{if filament_type[initial_filament_id] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n M106 S0 ; turn off fan , too noisy\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n\n{if (overall_chamber_temperature >= 40)}\nM1002 gcode_claim_action : 49\nM191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\n;===== z ofst cali start =====\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n G383 O0 M1 T140\n M400\n;===== z ofst cali end =====\nG90\nM83\nG0 Y200 F18000\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J0\n G28 R\n M623\n G29.2 S1\n;===== bed leveling end ================================\n\n; cali eddy z pos\n;G383.13 T1 C1\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} A\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 W73 K1 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\nM104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\nG150.3\n\n;===== xy ofst cali start =====\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M140 S[bed_temperature_initial_layer_single]\n M190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n M983.4 S0 ; turn off deformation compensation\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_filament_id]A B\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 70}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.003} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.017}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.002} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.022}\n {endif}\n {endif}\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X100 Y0 F24000\n M400\n ;G130 O0 X100 Y-0.4 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D5\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E12 D4\nG90\n G90\n M83\n G1 Z1\n M400\n;===== noozle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n;M993 A1 B1 C1 ; nozzle cam detection allowed.\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\n\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\n"
}
Reference in New Issue View Git Blame Copy Permalink