mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-06 15:21:09 +00:00
64 lines
1.2 KiB
JSON
64 lines
1.2 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Bambu PLA Aero @base",
|
|
"inherits": "fdm_filament_pla",
|
|
"from": "system",
|
|
"filament_id": "OFBSW57R",
|
|
"instantiation": "false",
|
|
"description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
|
|
"fan_min_speed": [
|
|
"30"
|
|
],
|
|
"filament_cost": [
|
|
"41.99"
|
|
],
|
|
"filament_density": [
|
|
"1.21"
|
|
],
|
|
"filament_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow",
|
|
"Direct Drive Extra High Flow",
|
|
"Bowden Standard",
|
|
"Bowden High Flow",
|
|
"Bowden Extra High Flow"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.6",
|
|
"0.6",
|
|
"0.6",
|
|
"0.6",
|
|
"0.6",
|
|
"0.6"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"6",
|
|
"6",
|
|
"6",
|
|
"6",
|
|
"6",
|
|
"6"
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"6"
|
|
],
|
|
"filament_type": [
|
|
"PLA-AERO"
|
|
],
|
|
"filament_vendor": [
|
|
"Bambu Lab"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"210"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"260"
|
|
],
|
|
"supertack_plate_temp": [
|
|
"0"
|
|
],
|
|
"supertack_plate_temp_initial_layer": [
|
|
"0"
|
|
]
|
|
}
|