mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 02:41:17 +00:00
SoftFever
cc883e458d
Polymaker, Overture and eSUN presets move from brand subfolders to BBL/filament/, matching BambuStudio's layout; their names and ids are unchanged. Default filament lists keep pointing at presets that exist, 0.2 mm nozzles keep a default PLA, and user presets based on removed or renamed presets still load. Generic SBS is no longer in the Bambu bundle; new selections on those printers fall back to OrcaFilamentLibrary's Generic SBS @System. The profile tool now recognises BambuStudio's new filament id/name maps and support_recommended_params.json as data files.
7 lines
12 KiB
JSON
7 lines
12 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Bambu Lab P2S 0.4 nozzle template machine_start_gcode",
|
|
"instantiation": "false",
|
|
"machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== P2S start gcode==========\n;===== 2026/05/18 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M620 M ;enable remap\n G389\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n G90\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n M983.4 S0\n;===== reset machine status =================\n\n;==== set airduct mode ====\n;==== if Chamber Cooling is necessary ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S255 ; turn on filter fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\n{else}\n{if (min_vitrification_temperature <= 50)}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n{else}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S127 ; turn on 50% filter fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PLA/TPU exhaust chamber autocooling\n{endif}\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M104 S140 A\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M972 S26 P0 C0\n M972 S42 P0 T5000\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G90\n G1 X128 Y128 F30000\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A ; rise temp in advance\n M972 S19 P0 T5000 ;plate type detection\n\n {if max_print_z >= 145}\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G150.3\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} ; rise temp in advance\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] E0\n M620.11 K0 I[initial_no_support_filament_id] R0\n\n M620 S[initial_no_support_filament_id]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_filament_id]}\n {if bed_temperature_initial_layer_single > 89}\n M1030 S1800\n SYNC R0 T1800\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n\n G91\n G1 Y-16 F12000 ; move away from the trash bin\n G90\n M400\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n\n{if filament_type[initial_filament_id] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n;===== wipe left nozzle end =====\n\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M970.2 Q1 K1 W74 Z0.01\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 K1 W74 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n\n M622 J0\n G28\n M623\n G29.2 S1\n G28\n;===== bed leveling end ================================\n\n M985.1 U0 E2\n M985.1 U1 E2\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M620 S[initial_no_support_filament_id]A\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_filament_id]A\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 89}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.0}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.03}\n {endif}\n {endif}\n\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X100 Y0 F24000\n M400\n ;G130 O0 X100 Y-0.4 Z0.8 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D5\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E12 D4\n G90\n M83\n G1 Z1\n M400\n;===== noozle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\") ||\n(filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu, pla and petg clog detect\n{else}\nM1015.3 S0;disable clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] W1 ;enable ams air printing detect\n\nM1010 Q0 B0.023 S0.01\nM1010 Q1 B0.005 S0.01\nM1010.1 S1\n"
|
|
}
|