3.6 KiB
Prusa CORE One INDX profiles
The Prusa bundle provides separate four-tool and eight-tool CORE One INDX models
with 0.4 mm high-flow nozzles and a 248 x 205 x 270 mm printable volume. These are
independent-tool printers, not single-extruder MMU3 machines. Both inherit
fdm_machine_common_coreone_indx, which inherits the ordinary CORE One HF
printer; the concrete printer presets supply their tool-count-dependent arrays. The bed and wizard resources come from Prusa.
The source configuration is PrusaResearch 2.5.10 from
Prusa's profile repository.
Its printer, process and filament settings are translated to Orca option names.
The supplied process presets cover 0.10, 0.15, 0.20 and 0.25 mm layers. Their
shared fdm_process_coreone_indx base inherits the ordinary CORE One HF SPEED
process, with explicit INDX differences and layer-specific child settings.
Material presets are shared with the ordinary CORE One family.
Tool changes and extrusion state
The start script initializes a persistent tool_init vector, counts the tools
used by the job, homes and probes using a loaded tool, calibrates the used tools,
and primes the initial tool at the cleaning station. The change script preserves
Prusa's G27, P0, T, G12, G750 and M906 sequences. It updates
e_retracted so Orca's subsequent unretraction agrees with the script's extrusion.
Per-tool temperature commands are guarded by is_extruder_used.
The off-bed purge station is the default. With a prime tower enabled, a newly
used tool still receives its initial station purge, while an initialized tool
uses the source's wipe-tower preparation path. tool_init persists across these
changes; treating every tool selection as first use would change the purge and
deretraction sequence.
Purge volume uses the filament's minimal purge setting. Orca's optional flush
volumetric speed is divided by filament cross-sectional area before it is used
as a linear extrusion-speed override. Prusa's separate filament_flush_volume
override is not available in these profiles. The source's EXCLUDE_E_START and
EXCLUDE_E_END internal markers become comments rather than printer commands.
Pressure-advance restoration and automatic pressure-advance emission use the
selected filament preset's settings. The INDX filament presets include
fdm_filament_template_indx, whose start G-code sets the filament's pressure
advance with M572 and then starts the firmware's automatic calibration with
M573 R, the commands PrusaSlicer emits after a tool change; the station purge
disables pressure advance before it. The template also carries Prusa's
multi-tool ramming and a 10 mm³ minimal purge. These profiles do not impose
machine-owned filament overrides. Dock-fan control retains the source's material and layer
conditions; shutdown parks the tool and turns off the used heaters and dock fan.
Configuration boundaries
The scripts use Orca's temperature, retraction, fan and speed option names. The nozzle-check high-flow flag is fixed because these presets describe HF nozzles; the abrasive-material flag is derived from the filament's required nozzle HRC. An unset idle temperature uses Orca's zero sentinel. ABS's source XY shrinkage compensation is represented using Orca's retained-size percentage.
Prusa's consistent-surface cooling strategy and filament-specific infill crossing speed limits have no direct Orca profile equivalent. These presets use Orca's native layer-time cooling and material volumetric limits. They do not add slicer features or change existing Prusa printer profiles.