mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-22 16:32:40 +00:00
55a0b51ae2
* Add Polymaker PLA Pro filament profile Polymaker PLA Pro is present in the tree only as printer-scoped variants under Snapmaker U1 and Anycubic Kobra S1, so it is invisible to every other printer. This adds it to the Orca Filament Library as OGFPM020 so it is selectable generally. Values are taken from the manufacturer's published print settings and cross-checked against the two existing vendor profiles: density 1.23 g/cm3 both existing profiles agree softening 55 C both existing profiles agree nozzle 220 C (210-230) manufacturer's stated range max volumetric speed 15 Snapmaker 15, Anycubic 16 Flow ratio is set to 0.96, matching the Snapmaker profile. Worth noting for review: the two existing profiles disagree here -- Snapmaker 0.96, Anycubic 0.85 -- because flow ratio depends on the extruder as much as the filament. Any single value in a vendor-neutral preset is a starting point users should calibrate; 0.96 is closer to the generic PLA baseline than 0.85 is. setting_id assigned by scripts/assign_vendor_setting_ids.py. OrcaFilamentLibrary version bumped 02.04.00.03 -> 02.04.00.04. * fix errors --------- Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
15 lines
268 B
JSON
15 lines
268 B
JSON
{
|
|
"type": "filament",
|
|
"name": "Polymaker PLA Pro @System",
|
|
"inherits": "Polymaker PLA Pro @base",
|
|
"from": "system",
|
|
"setting_id": "i5Fvxdl7AAJcErsv",
|
|
"instantiation": "true",
|
|
"filament_flow_ratio": [
|
|
"0.96"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"15"
|
|
]
|
|
}
|