mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-16 13:32:44 +00:00
SoftFever
ade9e77b6b
* Run every profile maintenance job from one tool orca_id_tool.py becomes orca_profile_tool.py, and orca_extra_profile_check.py and orca_filament_lib.py fold into it as subcommands: check, generate-id, fix, trim, update-index and update-snapshot. The three scripts already overlapped -- the checker imported half of its rules from the id tool, which in turn kept a copy-pasted set of output helpers to avoid the resulting import cycle -- while disagreeing on how a vendor is enumerated, how a JSON file is read and what the exit code means. One file settles all three. check, normalize, trim and update-index reproduce their predecessors exactly; normalize and update-index were diffed byte-for-byte against the old scripts over a copy of the whole tree. Deliberate changes: the compatible-printers check no longer switches itself off when --check-materials is passed, an error exits 1 rather than -1, update-index honours --profile-type and reports a profile it cannot place instead of dropping it from the index, fix and update-index gained --dry-run, trim keeps an unindexed file some surviving profile still inherits from, and vendors are enumerated as directories with an index -- which is why blacklist.json, a data file that an unscoped index rebuild once wrote four empty list sections into, loses them here and will not collect them again. The dead rename_filament_system() helper is gone. The suite under scripts/tests now covers the maintenance commands too, and CI runs it; nothing there ran in CI before. No shipped profile data changes apart from those four keys. * update vendor index files with "python3 ./scripts/orca_profile_tool.py update-index" and "python3 ./scripts/orca_profile_tool.py normalize"
202 lines
5.2 KiB
JSON
202 lines
5.2 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_klipper_common",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"gcode_flavor": "klipper",
|
|
"auxiliary_fan": "1",
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "5",
|
|
"cooling_tube_retraction": "91.5",
|
|
"default_filament_profile": [
|
|
"Generic PLA @InfiMech"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"enable_filament_ramming": "1",
|
|
"extra_loading_move": "-2",
|
|
"extruder_clearance_height_to_lid": "69",
|
|
"extruder_clearance_height_to_rod": "69",
|
|
"extruder_clearance_radius": "49",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"high_current_on_filament_swap": "0",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"machine_end_gcode": "PRINT_END",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"200"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3",
|
|
"0.4"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30",
|
|
"25"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"600",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"600",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"12"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
|
"machine_unload_filament_time": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "hardened_steel",
|
|
"nozzle_volume": "151.32",
|
|
"parking_pos_retraction": "92",
|
|
"print_host_webui": "",
|
|
"printable_area": [
|
|
"0x0",
|
|
"220x0",
|
|
"220x220",
|
|
"0x220"
|
|
],
|
|
"printable_height": "250",
|
|
"printer_model": "Generic Klipper Printer",
|
|
"printer_notes": "",
|
|
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printhost_apikey": "",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_cafile": "",
|
|
"printhost_password": "",
|
|
"printhost_port": "",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"printhost_user": "",
|
|
"purge_in_prime_tower": "1",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"249"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"template_custom_gcode": "",
|
|
"thumbnails": [
|
|
"300x300"
|
|
],
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"z_hop_types": [
|
|
"Normal Lift"
|
|
]
|
|
}
|