mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-18 05:00:55 +00:00
Eric McCannandCodex
7cbea5f454
Support variant-specific cooling, pressure advance, purge, ramming and temperature ranges. Keep shared U1 values as singletons and verify element-zero fallback for missing variant entries. Preserve preset migration aliases and validate high-flow selections using their declared nozzle volumes. Co-authored-by: Codex <codex@openai.com>
120 lines
2.2 KiB
JSON
120 lines
2.2 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Snapmaker PVA @U1",
|
|
"renamed_from": "Snapmaker PVA U1;Snapmaker PVA @U1 0.4 High Flow nozzle;Snapmaker PVA U1 0.4 High Flow nozzle",
|
|
"inherits": "Snapmaker PVA @U1 base",
|
|
"from": "system",
|
|
"setting_id": "A9gyeySGTtUrTPeG",
|
|
"instantiation": "true",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)",
|
|
"Snapmaker U1 (0.4 High Flow nozzle)"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"240"
|
|
],
|
|
"pressure_advance": [
|
|
"0.03"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"70"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"1"
|
|
],
|
|
"complete_print_exhaust_fan_speed": [
|
|
"70"
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"70"
|
|
],
|
|
"fan_min_speed": [
|
|
"100"
|
|
],
|
|
"filament_cooling_final_speed": [
|
|
"3.4"
|
|
],
|
|
"filament_cooling_initial_speed": [
|
|
"2.2"
|
|
],
|
|
"filament_cooling_moves": [
|
|
"4"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_loading_speed": [
|
|
"28"
|
|
],
|
|
"filament_loading_speed_start": [
|
|
"3"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"5",
|
|
"6"
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"20"
|
|
],
|
|
"filament_multitool_ramming": [
|
|
"1"
|
|
],
|
|
"filament_multitool_ramming_volume": [
|
|
"0.1"
|
|
],
|
|
"filament_retract_length_toolchange": [
|
|
"4"
|
|
],
|
|
"filament_retraction_length": [
|
|
"0.4",
|
|
"0.6"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_unloading_speed": [
|
|
"90"
|
|
],
|
|
"filament_unloading_speed_start": [
|
|
"100"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"Slope Lift"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"65"
|
|
],
|
|
"nozzle_temperature": [
|
|
"240"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"240"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"10"
|
|
],
|
|
"textured_plate_temp": [
|
|
"65"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"65"
|
|
],
|
|
"filament_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"filament_notes": [
|
|
"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"10"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"1",
|
|
"0.97"
|
|
]
|
|
}
|