mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-18 05:00:55 +00:00
Eric McCannandCodex
7cbea5f454
Support variant-specific cooling, pressure advance, purge, ramming and temperature ranges. Keep shared U1 values as singletons and verify element-zero fallback for missing variant entries. Preserve preset migration aliases and validate high-flow selections using their declared nozzle volumes. Co-authored-by: Codex <codex@openai.com>
71 lines
1.5 KiB
JSON
71 lines
1.5 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Snapmaker ABS @U1",
|
|
"renamed_from": "Snapmaker ABS U1;Snapmaker ABS @U1 0.4 High Flow nozzle;Snapmaker ABS U1 0.4 High Flow nozzle",
|
|
"inherits": "Snapmaker ABS @U1 base",
|
|
"from": "system",
|
|
"setting_id": "UFMRgwmOOQhOa3kB",
|
|
"instantiation": "true",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)",
|
|
"Snapmaker U1 (0.4 High Flow nozzle)"
|
|
],
|
|
"filament_retract_length_toolchange": [
|
|
"5"
|
|
],
|
|
"filament_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"filament_notes": [
|
|
"Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"0",
|
|
"15"
|
|
],
|
|
"fan_max_speed": [
|
|
"15",
|
|
"60"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"260",
|
|
"280"
|
|
],
|
|
"nozzle_temperature": [
|
|
"260",
|
|
"280"
|
|
],
|
|
"filament_multitool_ramming_volume": [
|
|
"0",
|
|
"5"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"0"
|
|
],
|
|
"filament_retraction_length": [
|
|
"0.6",
|
|
"0.2"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"8",
|
|
"22"
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"10",
|
|
"30"
|
|
],
|
|
"fan_min_speed": [
|
|
"15",
|
|
"10"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"nil",
|
|
"Slope Lift"
|
|
],
|
|
"filament_multitool_ramming": [
|
|
"0",
|
|
"1"
|
|
]
|
|
}
|