mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-23 10:52:15 +00:00
06c809c598
* Whitespace cleanup in Prusa profile
```
$ diff -u Prusa.json <(jq --indent 4 < Prusa.json) | wc -l
0
```
* Add Prusa MK4S profiles
There were generated from the PrusaSlicer profiles[0] using some scripts
which try to faithfully convert the profiles[1]. The high flow nozzle
settings have been modeled as a separate printer model.
A few things I'm aware of that haven't been converted:
- Filament multi-material settings (eg loading speeds)
- High-flow and abrasive nozzle check in gcode, which, as far as I
know, isn't available in the current firmware anyways
I've also found that disabling z-hop on layer change in OrcaSlicer seems
more similar to the behavior in PrusaSlicer (which allows travel
distance limitations to override that setting), so I've disabled that.
Fixes #7391
[0]: 0bca90da13/resources/profiles/PrusaResearch.ini
[1]: https://github.com/rcloran/SuperSlicer_to_Orca_scripts/tree/20d2881
36 lines
1.8 KiB
JSON
36 lines
1.8 KiB
JSON
{
|
|
"close_fan_the_first_x_layers": "4",
|
|
"compatible_printers": [
|
|
"Prusa MK4S 0.25 nozzle",
|
|
"Prusa MK4S 0.3 nozzle",
|
|
"Prusa MK4S 0.4 nozzle",
|
|
"Prusa MK4S 0.5 nozzle"
|
|
],
|
|
"default_filament_colour": "#FFF2EC",
|
|
"fan_max_speed": "10",
|
|
"filament_cost": "27.82",
|
|
"filament_end_gcode": [
|
|
"; Filament-specific end gcode"
|
|
],
|
|
"filament_id": "Generic ABS @MK4S",
|
|
"filament_max_volumetric_speed": "15",
|
|
"filament_minimal_purge_on_wipe_tower": "35",
|
|
"filament_notes": [
|
|
""
|
|
],
|
|
"filament_start_gcode": [
|
|
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
|
],
|
|
"from": "system",
|
|
"hot_plate_temp": "110",
|
|
"hot_plate_temp_initial_layer": "100",
|
|
"inherits": "fdm_filament_abs",
|
|
"instantiation": "true",
|
|
"name": "Prusa Generic ABS @MK4S",
|
|
"overhang_fan_speed": "20",
|
|
"reduce_fan_stop_start_freq": "0",
|
|
"setting_id": "GFSA04",
|
|
"slow_down_layer_time": "20",
|
|
"slow_down_min_speed": "15",
|
|
"type": "filament"
|
|
} |