mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-12 06:52:57 +00:00
27 lines
4.6 KiB
JSON
27 lines
4.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"name": "fdm_a350_dual",
|
|
"inherits": "fdm_linear2_dual",
|
|
"bed_model": "Snapmaker A350_bed.stl",
|
|
"bed_texture": "Snapmaker A350 Dual_texture.svg",
|
|
"printable_height": "285",
|
|
"printer_notes": "PRINTER_MODEL_SNAPMAKER_A350_DUAL\n",
|
|
"printable_area": [
|
|
"0x0",
|
|
"320x0",
|
|
"320x350",
|
|
"0x350"
|
|
],
|
|
"bed_exclude_area": [
|
|
"0x330",
|
|
"320x330",
|
|
"320x350",
|
|
"0x350"
|
|
],
|
|
"machine_start_gcode": "; Model: Snapmaker A350 Dual\n; Update: 20250313\n; Maintained by Snapmaker\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\n;G0 Z216 F960.0\n;G0 Y175.0 F3420.0\n;G0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\n;G28\n;{if 1==1}\n; G0 X0\n; G0 Z0.2 F960.0\n; G0 Y0 F3420.0\n; G0 X320\n; G0 Y350\n; G0 X0\n; G0 Y0\n;{endif}\n\nM83\n{if 1==1 && max(hot_plate_temp_initial_layer[initial_extruder], hot_plate_temp[initial_extruder]) >= 90}\nG0 Z0.06\nG92 Z0 ;reset z\n{endif}\n\n; flush initial nozzle\nT[initial_extruder]\nM104 S{max(250, min(290, nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 15))}; common flush temp\n\nG0 X10 F3420.0\nG0 Y0 F3420.0\nG0 Z1.6 F960.0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 15))} C2 W1\nG0 Z0.4 F200\nG1 E4 F80.0\nG92 E0\n\nM106 S{min(255, (fan_max_speed[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 10) * 2.55)}\n\nM104 S{nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 5}\n\nG0 Z5.6 F200\nM107\n\nG0 X40 F3420.0\nG0 Z0.3 F960.0\nM109 S{nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X280 E12 F3420.0\nG92 E0\n\nG1 Y10 E.522 F200\nG1 X40 E6.264 F3420.0\n\nG1 E-{retraction_length[initial_extruder]} F200\nG92 E0\nG0 Y20 F3420.0\n\n; ready [plate_name]",
|
|
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-10 F200\nG28\n\n{if is_extruder_used[(initial_extruder % 2 == 0 ? min(initial_extruder + 0, 63) : max(initial_extruder - (1-0), 0))]}\nM104 T{(initial_extruder % 2 == 0 ? min(initial_extruder + 0, 63) : max(initial_extruder - (1-0), 0))} S0\n {endif}\n{if is_extruder_used[(initial_extruder % 2 == 0 ? min(initial_extruder + 1, 63) : max(initial_extruder - (1-1), 0))]}\nM104 T{(initial_extruder % 2 == 0 ? min(initial_extruder + 1, 63) : max(initial_extruder - (1-1), 0))} S0\n {endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
|
|
"change_filament_gcode": ";***** Update: 20230923\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n ; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\n M140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_num == 1}\n G1 E{retraction_length[next_extruder]} F200;deretract\n{endif}\n\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n; M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n; End Toolchange\n{endif}",
|
|
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
|
|
} |