mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-15 03:41:28 +00:00
8f1103f064
* add new repositories and new push * fix bug about setting_id * fix bug and complete the test * Fix Goofoo profiles so the bundle loads and passes profile checks Repair the OrcaFilamentLibrary index entry that broke JSON parsing, regenerate the hand-written filament ids as Orca ids, and bump the library version. Point each printer's default filament and print profiles at presets that exist, normalize the two presets that needed it, rebuild both indexes, correct the ABS-GF/PA-GF/PA6-CF filament types, align the GP1/Velo+ preset names with the library's @ spacing, and fix the casing and resolution of the model cover images. * Drop the copied Custom Klipper printer from the Goofoo bundle Goofoo shipped Custom's MyKlipper machine model verbatim, so the Add Printer list offered "Generic Klipper Printer" twice and the printer type resolved its model_id by vendor order. The Goofoo machines now inherit the shared fdm_klipper_common directly, carrying over the per-variant layer heights the removed base supplied, matching how the other Klipper vendors wire theirs. Each machine's resolved settings are unchanged. * Align the Goofoo preset names with the profile conventions The machine models and variants already followed the <Model> / <Model> <nozzle> nozzle shape, but the processes put the model in the quality slot and used the bare vendor as the @ target (0.20mm GP1 @Goofoo). They are now named like every other vendor's: <lh>mm <Quality> @<Vendor> <Model> (0.20mm Standard @Goofoo GP1), with the machines' default_print_profile and the index updated to match. The four leaves also inherit the shared fdm_process_klipper_common directly instead of the copied Custom "0.20mm Standard @MyKlipper" base, which is removed; GP1 and TurboM gained the layer_height 0.2 that base supplied, so every preset's resolved settings are unchanged. Removed the orphaned Generic Klipper Printer cover and the unused Turbo-M texture, and renamed TurboM's bed texture to the -texture.svg form the other two models use. * new Goofoo machine and clean profile * Restore library filaments dropped by merges from main * Give the Goofoo Velo+ Tool and 0.2 nozzle fitting processes --------- Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
13 lines
1.6 KiB
JSON
13 lines
1.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_klipper_common",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"gcode_flavor": "klipper",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nM140 S{first_layer_bed_temperature[0]} ; set bed temp\nM104 S140 ; set temporary nozzle temp to prevent oozing\nG4 S10 ; wait 10s for preheating\nG28 ; home all axes\nG1 Z50 F240 ; raise Z axis\nG1 X2 Y10 F3000 ; move to start position\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp\nG1 Z0.28 F240 ; lower nozzle to print height\nG92 E0 ; reset extrusion distance\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; slight X adjustment\nG92 E0 ; reset extrusion distance\nG1 Y10 E10 F1200 ; prime again\nG92 E0 ; final extrusion reset",
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"change_filament_gcode": "PAUSE",
|
|
"machine_pause_gcode": "PAUSE"
|
|
} |