mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-24 11:22:07 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
132 lines
2.7 KiB
JSON
132 lines
2.7 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Soleyin Basic PETG @K2 Plus-all",
|
|
"inherits": "fdm_filament_petg",
|
|
"from": "system",
|
|
"setting_id": "w8SHt6Slm8uIqTbh",
|
|
"instantiation": "true",
|
|
"complete_print_exhaust_fan_speed": [
|
|
"0"
|
|
],
|
|
"cool_plate_temp": [
|
|
"70"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"0"
|
|
],
|
|
"eng_plate_temp": [
|
|
"70"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"30"
|
|
],
|
|
"fan_max_speed": [
|
|
"80"
|
|
],
|
|
"fan_min_speed": [
|
|
"40"
|
|
],
|
|
"filament_cost": [
|
|
"15.9"
|
|
],
|
|
"filament_density": [
|
|
"1.25"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"40"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.98"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"16"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"90%"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"40"
|
|
],
|
|
"filament_type": [
|
|
"PETG"
|
|
],
|
|
"filament_vendor": [
|
|
"Creality"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"2"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"Slope Lift"
|
|
],
|
|
"hot_plate_temp": [
|
|
"70"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"nozzle_temperature": [
|
|
"250"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"250"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"250"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"230"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"80"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"25%"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"12"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"20"
|
|
],
|
|
"temperature_vitrification": [
|
|
"80"
|
|
],
|
|
"textured_plate_temp": [
|
|
"70"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"activate_chamber_temp_control": "1",
|
|
"chamber_temperature": "35",
|
|
"customized_plate_temp": "70",
|
|
"customized_plate_temp_initial_layer": "70",
|
|
"enable_pressure_advance": "0",
|
|
"epoxy_resin_plate_temp": "60",
|
|
"epoxy_resin_plate_temp_initial_layer": "60",
|
|
"filament_retract_lift_above": "nil",
|
|
"filament_retract_lift_below": "nil",
|
|
"filament_retract_lift_enforce": "nil",
|
|
"material_flow_temp_graph": "[[0.5,230],[1.2,230],[1.2,250]]",
|
|
"pressure_advance": "0.074",
|
|
"default_filament_colour": "\"\"",
|
|
"compatible_printers": [
|
|
"Creality K2 Plus 0.4 nozzle",
|
|
"Creality K2 Plus 0.6 nozzle",
|
|
"Creality K2 Plus 0.8 nozzle"
|
|
],
|
|
"filament_id": "06005"
|
|
} |