mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-05 09:07:39 +00:00
725df64108
The belt-printer branch is failing two profile gates. Both stem from the three belt-only vendors (Custom's generic belt printer, IdeaFormer, Printcepts) not existing upstream, so upstream maintenance passed them by. Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/ 0.6/0.8 nozzle all fell back to "Default Setting". No process profile in the Custom vendor listed any MyBeltPrinter in compatible_printers, and Custom's fdm_belt_common pointed default_print_profile at "0.20mm Standard @System", which does not exist in that vendor's index, so the generic belt printer had no usable process at all. This gap dates to when MyBeltPrinter was added (2026-04-07); it only started failing now because the slice-check job is newer than that. Adds two process profiles modelled on the sibling @MyKlipper ones: - 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles - 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles The split is forced by hardware: the 0.2 nozzle preset caps max_layer_height at 0.16, so a single 0.20mm profile cannot legally cover it. fdm_belt_common now defaults to the standard profile and the 0.2 nozzle preset overrides to the fine one. setting_id: 14 files failed the rules introduced in #14432. That migration renumbered 7425 files across 61 vendors but skipped these three, leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter squatting the "G*" id space reserved for Bambu (GMPC0BBP01, GMIF001, GM_BELT_00x) and four instantiated filament/process presets carrying no setting_id at all. Regenerated with scripts/assign_vendor_setting_ids.py. Also repoints the identical dangling "0.20mm Standard @System" in Printcepts' and IdeaFormer's fdm_belt_common at their own real process profiles. That is a no-op today because both concrete printers override it, but it is the same landmine that took out MyBeltPrinter. Vendor index versions bumped so check_installed_vendor_profiles() will re-install the corrected profiles over an existing install. Note: changing a shipped preset's setting_id can orphan user presets that reference it as base_id. #14432 accepted that tradeoff for 61 vendors; this keeps these three consistent with the rest. Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors (was 14 files with errors), and OrcaSlicer_profile_validator -s slices all 1015 printer presets successfully (was 4 failures).
327 lines
8.0 KiB
JSON
327 lines
8.0 KiB
JSON
{
|
|
"name": "Custom Printer",
|
|
"version": "02.04.00.04",
|
|
"force_update": "0",
|
|
"description": "My configurations",
|
|
"machine_model_list": [
|
|
{
|
|
"name": "Generic Belt Printer",
|
|
"sub_path": "machine/MyBeltPrinter.json"
|
|
},
|
|
{
|
|
"name": "Generic Klipper Printer",
|
|
"sub_path": "machine/MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "Generic Marlin Printer",
|
|
"sub_path": "machine/MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "Generic RRF Printer",
|
|
"sub_path": "machine/MyRRF.json"
|
|
},
|
|
{
|
|
"name": "Generic Repetier Printer",
|
|
"sub_path": "machine/MyRepetier.json"
|
|
},
|
|
{
|
|
"name": "Generic ToolChanger Printer",
|
|
"sub_path": "machine/MyToolChanger.json"
|
|
}
|
|
],
|
|
"process_list": [
|
|
{
|
|
"name": "fdm_process_common",
|
|
"sub_path": "process/fdm_process_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_process_klipper_common",
|
|
"sub_path": "process/fdm_process_klipper_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_process_marlin_common",
|
|
"sub_path": "process/fdm_process_marlin_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_process_repetier_common",
|
|
"sub_path": "process/fdm_process_repetier_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_process_rrf_common",
|
|
"sub_path": "process/fdm_process_rrf_common.json"
|
|
},
|
|
{
|
|
"name": "0.08mm Extra Fine @MyKlipper",
|
|
"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.12mm Fine @MyKlipper",
|
|
"sub_path": "process/0.12mm Fine @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.15mm Optimal @MyKlipper",
|
|
"sub_path": "process/0.15mm Optimal @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.16mm Optimal @MyKlipper",
|
|
"sub_path": "process/0.16mm Optimal @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.12mm Fine @MyBeltPrinter",
|
|
"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyBeltPrinter",
|
|
"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyKlipper",
|
|
"sub_path": "process/0.20mm Standard @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.24mm Draft @MyKlipper",
|
|
"sub_path": "process/0.24mm Draft @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.28mm Extra Draft @MyKlipper",
|
|
"sub_path": "process/0.28mm Extra Draft @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.32mm Standard @MyKlipper",
|
|
"sub_path": "process/0.32mm Extra Draft @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.40mm Standard @MyKlipper",
|
|
"sub_path": "process/0.40mm Extra Draft @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "0.56mm Standard @MyKlipper",
|
|
"sub_path": "process/0.56mm Extra Draft @MyKlipper.json"
|
|
},
|
|
{
|
|
"name": "fdm_process_mytoolchanger_common",
|
|
"sub_path": "process/fdm_process_mytoolchanger_common.json"
|
|
},
|
|
{
|
|
"name": "0.08mm Extra Fine @MyMarlin",
|
|
"sub_path": "process/0.08mm Extra Fine @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.12mm Fine @MyMarlin",
|
|
"sub_path": "process/0.12mm Fine @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.15mm Optimal @MyMarlin",
|
|
"sub_path": "process/0.15mm Optimal @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyMarlin",
|
|
"sub_path": "process/0.20mm Standard @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.24mm Draft @MyMarlin",
|
|
"sub_path": "process/0.24mm Draft @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.28mm Extra Draft @MyMarlin",
|
|
"sub_path": "process/0.28mm Extra Draft @MyMarlin.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyRepetier",
|
|
"sub_path": "process/0.20mm Standard @MyRepetier.json"
|
|
},
|
|
{
|
|
"name": "0.08mm Extra Fine @MyRRF",
|
|
"sub_path": "process/0.08mm Extra Fine @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.12mm Fine @MyRRF",
|
|
"sub_path": "process/0.12mm Fine @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.15mm Optimal @MyRRF",
|
|
"sub_path": "process/0.15mm Optimal @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyRRF",
|
|
"sub_path": "process/0.20mm Standard @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.24mm Draft @MyRRF",
|
|
"sub_path": "process/0.24mm Draft @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.28mm Extra Draft @MyRRF",
|
|
"sub_path": "process/0.28mm Extra Draft @MyRRF.json"
|
|
},
|
|
{
|
|
"name": "0.08mm Extra Fine @MyToolChanger",
|
|
"sub_path": "process/0.08mm Extra Fine @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.12mm Fine @MyToolChanger",
|
|
"sub_path": "process/0.12mm Fine @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.15mm Optimal @MyToolChanger",
|
|
"sub_path": "process/0.15mm Optimal @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.16mm Optimal @MyToolChanger",
|
|
"sub_path": "process/0.16mm Optimal @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.20mm Standard @MyToolChanger",
|
|
"sub_path": "process/0.20mm Standard @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.24mm Draft @MyToolChanger",
|
|
"sub_path": "process/0.24mm Draft @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.28mm Extra Draft @MyToolChanger",
|
|
"sub_path": "process/0.28mm Extra Draft @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.32mm Extra Draft @MyToolChanger",
|
|
"sub_path": "process/0.32mm Extra Draft @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.40mm Standard @MyToolChanger",
|
|
"sub_path": "process/0.40mm Extra Draft @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "0.56mm Standard @MyToolChanger",
|
|
"sub_path": "process/0.56mm Extra Draft @MyToolChanger.json"
|
|
}
|
|
],
|
|
"filament_list": [
|
|
{
|
|
"name": "Generic ABS @MyToolChanger",
|
|
"sub_path": "filament/Generic ABS @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic ASA @MyToolChanger",
|
|
"sub_path": "filament/Generic ASA @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PA @MyToolChanger",
|
|
"sub_path": "filament/Generic PA @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PA-CF @MyToolChanger",
|
|
"sub_path": "filament/Generic PA-CF @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PC @MyToolChanger",
|
|
"sub_path": "filament/Generic PC @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PETG @MyToolChanger",
|
|
"sub_path": "filament/Generic PETG @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PLA @MyToolChanger",
|
|
"sub_path": "filament/Generic PLA @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PLA-CF @MyToolChanger",
|
|
"sub_path": "filament/Generic PLA-CF @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic PVA @MyToolChanger",
|
|
"sub_path": "filament/Generic PVA @MyToolChanger.json"
|
|
},
|
|
{
|
|
"name": "Generic TPU @MyToolChanger",
|
|
"sub_path": "filament/Generic TPU @MyToolChanger.json"
|
|
}
|
|
],
|
|
"machine_list": [
|
|
{
|
|
"name": "fdm_machine_common",
|
|
"sub_path": "machine/fdm_machine_common.json"
|
|
},
|
|
{
|
|
"name": "MyMarlin 0.4 nozzle",
|
|
"sub_path": "machine/MyMarlin 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "fdm_klipper_common",
|
|
"sub_path": "machine/fdm_klipper_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_repetier_common",
|
|
"sub_path": "machine/fdm_repetier_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_rrf_common",
|
|
"sub_path": "machine/fdm_rrf_common.json"
|
|
},
|
|
{
|
|
"name": "MyKlipper 0.2 nozzle",
|
|
"sub_path": "machine/MyKlipper 0.2 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyKlipper 0.4 nozzle",
|
|
"sub_path": "machine/MyKlipper 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyKlipper 0.6 nozzle",
|
|
"sub_path": "machine/MyKlipper 0.6 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyKlipper 0.8 nozzle",
|
|
"sub_path": "machine/MyKlipper 0.8 nozzle.json"
|
|
},
|
|
{
|
|
"name": "fdm_belt_common",
|
|
"sub_path": "machine/fdm_belt_common.json"
|
|
},
|
|
{
|
|
"name": "fdm_toolchanger_common",
|
|
"sub_path": "machine/fdm_toolchanger_common.json"
|
|
},
|
|
{
|
|
"name": "MyRRF 0.4 nozzle",
|
|
"sub_path": "machine/MyRRF 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyBeltPrinter 0.2 nozzle",
|
|
"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyBeltPrinter 0.4 nozzle",
|
|
"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyBeltPrinter 0.6 nozzle",
|
|
"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyBeltPrinter 0.8 nozzle",
|
|
"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyRepetier 0.4 nozzle",
|
|
"sub_path": "machine/MyRepetier 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyToolChanger 0.2 nozzle",
|
|
"sub_path": "machine/MyToolChanger 0.2 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyToolChanger 0.4 nozzle",
|
|
"sub_path": "machine/MyToolChanger 0.4 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyToolChanger 0.6 nozzle",
|
|
"sub_path": "machine/MyToolChanger 0.6 nozzle.json"
|
|
},
|
|
{
|
|
"name": "MyToolChanger 0.8 nozzle",
|
|
"sub_path": "machine/MyToolChanger 0.8 nozzle.json"
|
|
}
|
|
]
|
|
}
|