mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-18 14:32:36 +00:00
Tommaso Bianchi
6ce20d78c3
Selecting a face and sketching on it is the most common gesture in solid
modelling, and it was impossible. The plane came from a combo holding
XY/XZ/YZ plus datums, and plane_from_choice had no face branch at all, so
the only route onto a face was to build a Coincident datum plane on it
first, confirm that, reopen the sketch and find the datum in the
dropdown. Three extra steps and a junk feature in the tree.
The fix is not another combo row. A new sketch now takes its plane from
what is SELECTED IN THE VIEWPORT: a picked planar face wins outright, and
only when nothing is picked does it fall back to the reference plane —
which is itself normally set by clicking one of the ghost planes in 3D,
not by opening the combo. The tool hint names the target ("Circle — click
center, then radius · on the picked face") so the choice is visible on the
geometry side rather than needing a control to read back.
CadDocument::plane_of_face is the shared derivation, so the sketch path
and the Coincident datum method cannot drift apart. It refuses
non-planar faces: face_normal_world evaluates at the mid parameter, which
on a cylinder or a fillet is a tangent plane at one arbitrary point —
fine for offsetting a datum, wrong as a sketch plane, and silently
sketching on a tangent is worse than declining.
Picking the face also CONSUMES it. Leaving the pick live meant the next
Extrude saw a selected face and push/pulled it instead of extruding the
sketch just drawn — the same trap the imported-art path already guards
against.
Verified on :10 end to end with no combo interaction: build a box, click
its top face twice to cycle whole -> face, press S then C, and the circle
is drawn in the plane of that face with its Radius tab on the geometry
(artifacts/shots/f3a2-03-face.png, f3a2-04-sketch-on-face.png,
f3a2-05-circle-drawn.png). Kernel side: 154 cases / 2125 assertions green
on both forks, including that a cylinder resolves exactly its two flat
caps and refuses the barrel.
Still side-panel-shaped and to be dealt with separately: the Plane combo
remains on the card and now merely displays a stale row when a face is
the real target. It should show the actual target or go away.
snaporca-3a2.