harrierpigeon d35af1806a Belt cooling: keep the fan off in the band inside the layer cooling pass ...

The band was a second pass over the finished layer that fought the fan commands
the layer pass had already written (overhang, bridge and resume requests). The
generator now marks where each segment enters and leaves the band and the layer
pass treats the band as the strongest fan request, so there is one place that
decides the fan.

2026-10-02 12:46:44 -05:00

..

CMakeLists.txt

Read the Belt Tilt Only from the Belt G-code Header

2026-09-14 17:27:32 +08:00

fff_print_tests.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

test_cooling.cpp

Fix overhang fan control when overhang slowdown is enabled (#15158)

2026-09-01 18:07:02 -03:00

test_extrusion_entity.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_extrusion_processor.cpp

Fix slowdown for caged external overhangs (#14735)

2026-08-16 23:40:50 -03:00

test_fill.cpp

Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill (#15206)

2026-09-10 08:03:50 -03:00

test_flow.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_gcode_processor.cpp

Read the Belt Tilt Only from the Belt G-code Header

2026-09-14 17:27:32 +08:00

test_gcode_timing.cpp

Normalize the junction direction vector over XYZE (#15308)

2026-08-20 18:50:23 -03:00

test_gcodewriter.cpp

Drop references to planning docs that are not in the tree

2026-09-30 15:44:49 -05:00

test_helpers.cpp

tests: adapt belt brim coverage to upstream validation

2026-08-25 10:27:08 -05:00

test_helpers.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

test_mixed_filament.cpp

Update sublayer option check. Add validation warning for gradient mixed filament without sublayer mixing

2026-08-24 15:30:02 +08:00

test_model.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_multifilament.cpp

Fix Linux unit test failure in the wipe tower temperature trace comparison (#15161)

2026-08-07 20:26:18 +08:00

test_perimeters.cpp

Fix: Only one wall top surfaces (#14929)

2026-07-29 09:23:35 -03:00

test_print.cpp

Belt cooling: keep the fan off in the band inside the layer cooling pass

2026-10-02 12:46:44 -05:00

test_printobject.cpp

Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill (#15206)

2026-09-10 08:03:50 -03:00

test_skirt_brim.cpp

Belt validation: refuse a brim next to a purge tower object

2026-10-02 12:46:44 -05:00

test_slicing_pipeline_hook.cpp

Fix plugin configuration not taking effect, and improve the plugin config UI (#14944)

2026-07-25 20:00:56 +08:00

test_support_material.cpp

test: cover support interface generation and tree support (#15575)

2026-09-07 18:02:14 -03:00

test_tree_support.cpp

Make Tree-Support Deterministic (#15565)

2026-09-09 12:33:42 +08:00

test_trianglemesh.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_wipe_tower.cpp

Verify WipeTower Footprint at Point of Generation

2026-09-09 15:45:16 +08:00