mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 00:52:04 +00:00
69c2143804
* bugfix for TPU filament overrides * higher voluemetric flow * bugfix for to high speed at internal solid infill * Update Prusa.json * updated firmware check and nozzle settings * bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle * variables not defined in orcaslicer * bug fix volumetric speed, wrong value * added high flow base process * added highflow base process * added first full draft of high flow profiles, further tests are necessary * changed 0.35mm to 0.32mm for 0.6mm nozzle * minor changes to initial layer speeds * changed 0.35mm to 0.32mm for 0.6mm nozzle * furcer changes on accelartion and speed * added 0.35mm Standard @MK3.5 again for not breaking anythin for current users * Update 0.35mm Standard @MK3.5.json forgot to set the layer_height after creation of the 0.35mm profile
47 lines
1.4 KiB
JSON
47 lines
1.4 KiB
JSON
{
|
|
"type": "process",
|
|
"setting_id": "GP004",
|
|
"name": "0.40mm High Flow @MK3.5",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "process_highflow_MK3.5",
|
|
"line_width": "0.9",
|
|
"inner_wall_line_width": "0.9",
|
|
"outer_wall_line_width": "0.9",
|
|
"top_surface_line_width": "0.75",
|
|
"sparse_infill_line_width": "0.9",
|
|
"initial_layer_line_width": "1",
|
|
"internal_solid_infill_line_width": "0.9",
|
|
"support_line_width": "0.65",
|
|
"layer_height": "0.4",
|
|
"initial_layer_print_height": "0.3",
|
|
"wall_loops": "2",
|
|
"top_shell_thickness": "1.2",
|
|
"top_shell_layers": "4",
|
|
"bottom_shell_thickness": "0.8",
|
|
"bottom_shell_layers": "3",
|
|
"initial_layer_speed": "40",
|
|
"initial_layer_infill_speed": "55",
|
|
"outer_wall_speed": "90",
|
|
"inner_wall_speed": "100",
|
|
"bridge_speed": "22",
|
|
"support_speed": "90",
|
|
"small_perimeter_speed": "90",
|
|
"sparse_infill_speed": "105",
|
|
"internal_solid_infill_speed": "100",
|
|
"top_surface_speed": "75",
|
|
"gap_infill_speed": "65",
|
|
"travel_speed": "300",
|
|
"default_acceleration": "2000",
|
|
"initial_layer_acceleration": "500",
|
|
"top_surface_acceleration": "1500",
|
|
"travel_acceleration": "4000",
|
|
"sparse_infill_acceleration": "4000",
|
|
"internal_solid_infill_acceleration": "3000",
|
|
"inner_wall_acceleration": "3000",
|
|
"outer_wall_acceleration": "2500",
|
|
"bridge_acceleration": "1000",
|
|
"compatible_printers": [
|
|
"Prusa MK3.5 0.8 nozzle"
|
|
]
|
|
} |