OrcaSlicer/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

{
	"type": "filament",
	"name": "addnorth PLA HT-PLA PRO Matte",
	"inherits": "Generic PLA @base",
	"from": "system",
	"setting_id": "GF_ANHTP_00",
	"filament_id": "OFVDWuxl",
	"instantiation": "true",
	"activate_air_filtration": [
		"0"
	],
	"additional_cooling_fan_speed": [
		"70"
	],
	"chamber_temperatures": [
		"0"
	],
	"circle_compensation_speed": [
		"200"
	],
	"close_fan_the_first_x_layers": [
		"2"
	],
	"compatible_printers": [
		"Bambu Lab A1 mini 0.4 nozzle",
		"Bambu Lab A1 mini 0.6 nozzle",
		"Bambu Lab A1 mini 0.8 nozzle",
		"Bambu Lab A1 0.4 nozzle",
		"Bambu Lab A1 0.6 nozzle",
		"Bambu Lab A1 0.8 nozzle",
		"Bambu Lab P1P 0.4 nozzle",
		"Bambu Lab P1P 0.6 nozzle",
		"Bambu Lab P1P 0.8 nozzle",
		"Bambu Lab P1S 0.4 nozzle",
		"Bambu Lab P1S 0.6 nozzle",
		"Bambu Lab P1S 0.8 nozzle",
		"Bambu Lab X1 0.4 nozzle",
		"Bambu Lab X1 0.6 nozzle",
		"Bambu Lab X1 0.8 nozzle",
		"Bambu Lab X1 Carbon 0.4 nozzle",
		"Bambu Lab X1 Carbon 0.6 nozzle",
		"Bambu Lab X1 Carbon 0.8 nozzle",
		"Bambu Lab X1E 0.4 nozzle",
		"Bambu Lab X1E 0.6 nozzle",
		"Bambu Lab X1E 0.8 nozzle",
		"Bambu Lab H2D 0.4 nozzle",
		"Bambu Lab H2D 0.6 nozzle",
		"Bambu Lab H2D 0.8 nozzle",
		"Bambu Lab H2D Pro 0.4 nozzle",
		"Bambu Lab H2D Pro 0.6 nozzle",
		"Bambu Lab H2D Pro 0.8 nozzle",
		"Bambu Lab H2S 0.4 nozzle",
		"Bambu Lab H2S 0.6 nozzle",
		"Bambu Lab H2S 0.8 nozzle",
		"Bambu Lab P2S 0.4 nozzle",
		"Bambu Lab P2S 0.6 nozzle",
		"Bambu Lab P2S 0.8 nozzle",
		"Bambu Lab X2D 0.2 nozzle",
		"Bambu Lab X2D 0.4 nozzle",
		"Bambu Lab X2D 0.6 nozzle",
		"Bambu Lab X2D 0.8 nozzle"
	],
	"compatible_printers_condition": "",
	"compatible_prints": [],
	"compatible_prints_condition": "",
	"complete_print_exhaust_fan_speed": [
		"70"
	],
	"cool_plate_temp": [
		"55"
	],
	"cool_plate_temp_initial_layer": [
		"55"
	],
	"counter_coef_1": [
		"0"
	],
	"counter_coef_2": [
		"0.008"
	],
	"counter_coef_3": [
		"-0.041"
	],
	"counter_limit_max": [
		"0.033"
	],
	"counter_limit_min": [
		"-0.035"
	],
	"default_filament_colour": [
		""
	],
	"diameter_limit": [
		"50"
	],
	"during_print_exhaust_fan_speed": [
		"70"
	],
	"enable_overhang_bridge_fan": [
		"1"
	],
	"enable_pressure_advance": [
		"0"
	],
	"eng_plate_temp": [
		"0"
	],
	"eng_plate_temp_initial_layer": [
		"0"
	],
	"fan_cooling_layer_time": [
		"100"
	],
	"fan_max_speed": [
		"100"
	],
	"fan_min_speed": [
		"100"
	],
	"filament_adhesiveness_category": [
		"100"
	],
	"filament_change_length": [
		"10"
	],
	"filament_cost": [
		"55"
	],
	"filament_density": [
		"1.4"
	],
	"filament_deretraction_speed": [
		"nil",
		"nil"
	],
	"filament_diameter": [
		"1.75"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard"
	],
	"filament_flow_ratio": [
		"0.98",
		"0.98"
	],
	"filament_is_support": [
		"0"
	],
	"filament_long_retractions_when_cut": [
		"nil",
		"nil"
	],
	"filament_max_volumetric_speed": [
		"8",
		"11"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15"
	],
	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
	"filament_pre_cooling_temperature": [
		"0",
		"0"
	],
	"filament_prime_volume": [
		"45"
	],
	"filament_ramming_travel_time": [
		"0",
		"0"
	],
	"filament_ramming_volumetric_speed": [
		"-1",
		"-1"
	],
	"filament_retract_before_wipe": [
		"nil",
		"nil"
	],
	"filament_retract_restart_extra": [
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil",
		"nil"
	],
	"filament_retraction_distances_when_cut": [
		"nil",
		"nil"
	],
	"filament_retraction_length": [
		"nil",
		"nil"
	],
	"filament_retraction_minimum_travel": [
		"nil",
		"nil"
	],
	"filament_retraction_speed": [
		"nil",
		"nil"
	],
	"filament_scarf_gap": [
		"15%"
	],
	"filament_scarf_height": [
		"10%"
	],
	"filament_scarf_length": [
		"10"
	],
	"filament_scarf_seam_type": [
		"none"
	],
	"filament_settings_id": [
		"addnorth PLA HT-PLA PRO Matte"
	],
	"filament_shrink": [
		"100%"
	],
	"filament_soluble": [
		"0"
	],
	"filament_start_gcode": [
		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
	],
	"filament_type": [
		"PLA"
	],
	"filament_vendor": [
		"addnorth"
	],
	"filament_wipe": [
		"nil",
		"nil"
	],
	"filament_wipe_distance": [
		"nil",
		"nil"
	],
	"filament_z_hop": [
		"nil",
		"nil"
	],
	"filament_z_hop_types": [
		"nil",
		"nil"
	],
	"full_fan_speed_layer": [
		"0"
	],
	"hole_coef_1": [
		"0"
	],
	"hole_coef_2": [
		"-0.008"
	],
	"hole_coef_3": [
		"0.23415"
	],
	"hole_limit_max": [
		"0.22"
	],
	"hole_limit_min": [
		"0.088"
	],
	"hot_plate_temp": [
		"70"
	],
	"hot_plate_temp_initial_layer": [
		"70"
	],
	"impact_strength_z": [
		"10"
	],
	"nozzle_temperature": [
		"240",
		"240"
	],
	"nozzle_temperature_initial_layer": [
		"235",
		"235"
	],
	"nozzle_temperature_range_high": [
		"245"
	],
	"nozzle_temperature_range_low": [
		"210"
	],
	"overhang_fan_speed": [
		"100"
	],
	"overhang_fan_threshold": [
		"50%"
	],
	"overhang_threshold_participating_cooling": [
		"95%"
	],
	"pre_start_fan_time": [
		"2"
	],
	"pressure_advance": [
		"0.02"
	],
	"reduce_fan_stop_start_freq": [
		"1"
	],
	"required_nozzle_HRC": [
		"3"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"slow_down_layer_time": [
		"8"
	],
	"slow_down_min_speed": [
		"20"
	],
	"supertack_plate_temp": [
		"45"
	],
	"supertack_plate_temp_initial_layer": [
		"45"
	],
	"temperature_vitrification": [
		"50"
	],
	"textured_plate_temp": [
		"75"
	],
	"textured_plate_temp_initial_layer": [
		"75"
	],
	"version": "2.0.0.77"
}