OrcaSlicer/resources/profiles/RH3D/filament/fdm_filament_common.json

{
	"type": "filament",
	"name": "fdm_filament_common",
	"from": "system",
	"instantiation": "false",
	"cool_plate_temp": [
		"60"
	],
	"eng_plate_temp": [
		"60"
	],
	"hot_plate_temp": [
		"60"
	],
	"cool_plate_temp_initial_layer": [
		"60"
	],
	"eng_plate_temp_initial_layer": [
		"60"
	],
	"hot_plate_temp_initial_layer": [
		"60"
	],
	"overhang_fan_threshold": [
		"25%"
	],
	"overhang_fan_speed": [
		"100"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"close_fan_the_first_x_layers": [
		"1"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	],
	"filament_flow_ratio": [
		"1"
	],
	"reduce_fan_stop_start_freq": [
		"1"
	],
	"fan_cooling_layer_time": [
		"20"
	],
	"filament_cost": [
		"0"
	],
	"filament_density": [
		"0"
	],
	"filament_change_length": [
		"0"
	],
	"filament_deretraction_speed": [
		"nil"
	],
	"filament_diameter": [
		"1.75"
	],
	"filament_max_volumetric_speed": [
		"10"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"50"
	],
	"filament_retraction_minimum_travel": [
		"nil"
	],
	"filament_retract_before_wipe": [
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil"
	],
	"filament_retraction_length": [
		"nil"
	],
	"filament_z_hop": [
		"nil"
	],
	"filament_retract_restart_extra": [
		"nil"
	],
	"filament_retraction_speed": [
		"nil"
	],
	"filament_settings_id": [
		""
	],
	"filament_soluble": [
		"0"
	],
	"filament_type": [
		"PLA"
	],
	"filament_vendor": [
		"Generic"
	],
	"filament_wipe": [
		"nil"
	],
	"filament_wipe_distance": [
		"nil"
	],
	"bed_type": [
		"Cool Plate"
	],
	"nozzle_temperature_initial_layer": [
		"200"
	],
	"full_fan_speed_layer": [
		"3"
	],
	"fan_max_speed": [
		"100"
	],
	"fan_min_speed": [
		"20"
	],
	"slow_down_min_speed": [
		"20"
	],
	"slow_down_layer_time": [
		"7"
	],
	"filament_start_gcode": [
		"; Filament gcode\n"
	],
	"nozzle_temperature": [
		"200"
	],
	"temperature_vitrification": [
		"100"
	]
}