mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 19:01:02 +00:00
timschneider
5b4862b364
A preset whose layer height exceeds ~45% of the outer wall line width has
less than ~6 degrees of reserve on a 45 degree wall (max self-supporting
angle atan((w-h)/h)), and support cannot compensate because the 45 degree
stair tread is only h wide - far below one support line. Those presets are
not usable in practice, so shipping them only invites failed prints.
Removes the 22 rungs above h/w = 0.45 and prunes them from the vendor
index. What remains per nozzle (default first):
CHX 350 0.4: 0.18 | 0.6: 0.24 0.28 | 0.8: 0.32 0.36
1.0: 0.44 0.48 | 1.2: 0.48 0.56
MBL 0.4: 0.18 | 0.6: 0.24 0.28 | 0.8: 0.36 0.34
1.0: 0.44 0.48 | 1.2: 0.48 0.56
The 0.4 nozzle keeps a single rung: 0.20 mm would qualify (h/w = 0.435) but
divides both screw leads evenly (4/0.20, 8/0.20) and stays excluded by the
Z-artifact rule, and 0.22 is already at 0.478.
Also corrects the MBL 0.8 default to 0.36 mm, which at w = 0.92 sits at
h/w = 0.391 and therefore still satisfies the stricter 40% default rule.
31 lines
600 B
JSON
31 lines
600 B
JSON
{
|
|
"type": "machine",
|
|
"name": "Meltingplot MBL 480 0.8 nozzle",
|
|
"inherits": "fdm_machine_meltingplot_mbl",
|
|
"from": "system",
|
|
"setting_id": "3wnBTip16mjzuNaR",
|
|
"instantiation": "true",
|
|
"printer_model": "Meltingplot MBL 480",
|
|
"printer_variant": "0.8",
|
|
"nozzle_diameter": [
|
|
"0.8"
|
|
],
|
|
"min_layer_height": [
|
|
"0.32"
|
|
],
|
|
"max_layer_height": [
|
|
"0.48"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"850x0",
|
|
"850x405",
|
|
"0x405"
|
|
],
|
|
"printable_height": "1396",
|
|
"default_print_profile": "0.36mm Optimal 0.8 nozzle @Meltingplot MBL",
|
|
"default_filament_profile": [
|
|
"Meltingplot PLA @0.8 nozzle"
|
|
]
|
|
}
|