mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-04 22:31:02 +00:00
harrierpigeon
556569c0e3
The cooling buffer's band pass rebuilt positions from the layer's G-code and tested them against the first-layer plane. The G-code is in machine coordinates and the plane is in slicing coordinates, so on the shipped profiles the nearest move was over 100 mm from a 0.2 mm band and the pass never changed the fan. GCode::_extrude() already knows each path's height above the belt, so it now tags the band changes and the buffer applies and strips the tags. The pass also took the S of every M106 as the part fan, whatever its P index, and stored that 0..255 value where a percentage was expected (an auxiliary fan line came back as M106 S651); it now uses FanMover's parser, which ignores other fans, and converts to percent. It no longer overwrites the layer's intended speed, only the fan's actual state. Raised in Hanif Koh's review of #14394.
OrcaSlicer tests
Building, running and writing tests is documented on the wiki, under How to Test.
Two files here rather than there, because coding agents only read what is in the repository: