mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-02 08:31:13 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
44 lines
1.3 KiB
JSON
44 lines
1.3 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.20mm Standard @FF G4P",
|
|
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
|
"from": "system",
|
|
"setting_id": "boicXzn9lxXQLWx4",
|
|
"instantiation": "true",
|
|
"bottom_solid_infill_flow_ratio": "0.98",
|
|
"bridge_flow": "0.98",
|
|
"bridge_speed": "15",
|
|
"brim_type": "auto_brim",
|
|
"elefant_foot_compensation": "0.1",
|
|
"enable_arc_fitting": "1",
|
|
"enable_prime_tower": "1",
|
|
"exclude_object": "1",
|
|
"filter_out_gap_fill": "0.1",
|
|
"compatible_printers": [
|
|
"Flashforge Guider4 Pro 0.4 nozzle"
|
|
],
|
|
"gap_fill_target": "topbottom",
|
|
"infill_wall_overlap": "15%",
|
|
"initial_layer_print_height": "0.25",
|
|
"initial_layer_speed": "60",
|
|
"internal_bridge_flow": "0.98",
|
|
"max_travel_detour_distance": "300",
|
|
"only_one_wall_top": "1",
|
|
"prime_tower_brim_width": "5",
|
|
"prime_tower_width": "30",
|
|
"prime_volume": "40",
|
|
"print_settings_id": "0.20mm Standard @FF G4P",
|
|
"seam_gap": "5%",
|
|
"skirt_loops": "0",
|
|
"slowdown_for_curled_perimeters": "0",
|
|
"small_perimeter_speed": "10",
|
|
"support_interface_bottom_layers": "0",
|
|
"support_interface_spacing": "0.2",
|
|
"support_type": "tree(auto)",
|
|
"top_solid_infill_flow_ratio": "0.98",
|
|
"travel_acceleration": "30000",
|
|
"travel_speed": "600",
|
|
"wipe_tower_cone_angle": "10",
|
|
"wipe_tower_extra_spacing": "110%"
|
|
}
|