mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-11 21:11:59 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
144 lines
3.7 KiB
JSON
144 lines
3.7 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Generic PLA @Hi-all",
|
|
"inherits": "fdm_filament_pla",
|
|
"from": "system",
|
|
"setting_id": "eza77EPrdoTvZdw7",
|
|
"instantiation": "true",
|
|
"activate_air_filtration": [
|
|
"0"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"0"
|
|
],
|
|
"complete_print_exhaust_fan_speed": [
|
|
"80"
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"60"
|
|
],
|
|
"eng_plate_temp": [
|
|
"45"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"45"
|
|
],
|
|
"filament_cost": [
|
|
"30"
|
|
],
|
|
"filament_density": [
|
|
"1.25"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_diameter": [
|
|
"1.75"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.98"
|
|
],
|
|
"filament_is_support": [
|
|
"0"
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"15"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"100"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"nil"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_length": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_soluble": [
|
|
"0"
|
|
],
|
|
"filament_vendor": [
|
|
"Generic"
|
|
],
|
|
"filament_wipe": [
|
|
"nil"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"nil"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"0"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"240"
|
|
],
|
|
"required_nozzle_HRC": [
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"20"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
|
],
|
|
"filament_end_gcode": [
|
|
"; filament end gcode"
|
|
],
|
|
"activate_chamber_temp_control": "0",
|
|
"chamber_temperature": "0",
|
|
"cool_cds_fan_start_at_height": "0.5",
|
|
"cool_special_cds_fan_speed": "0",
|
|
"default_filament_colour": "\"\"",
|
|
"dont_slow_down_outer_wall": "1",
|
|
"enable_overhang_bridge_fan": "1",
|
|
"enable_pressure_advance": "0",
|
|
"enable_special_area_additional_cooling_fan": "0",
|
|
"epoxy_resin_plate_temp": "60",
|
|
"epoxy_resin_plate_temp_initial_layer": "60",
|
|
"filament_cooling_final_speed": "3.4",
|
|
"filament_cooling_initial_speed": "2.2",
|
|
"filament_cooling_moves": "4",
|
|
"filament_load_time": "0",
|
|
"filament_loading_speed": "28",
|
|
"filament_loading_speed_start": "3",
|
|
"filament_multitool_ramming": "0",
|
|
"filament_multitool_ramming_flow": "10",
|
|
"filament_multitool_ramming_volume": "10",
|
|
"filament_notes": "\"\"",
|
|
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
|
"filament_retract_lift_above": "nil",
|
|
"filament_retract_lift_below": "nil",
|
|
"filament_retract_lift_enforce": "nil",
|
|
"filament_shrink": "100%",
|
|
"filament_toolchange_delay": "0",
|
|
"filament_unload_time": "0",
|
|
"filament_unloading_speed": "90",
|
|
"filament_unloading_speed_start": "100",
|
|
"material_flow_dependent_temperature": "0",
|
|
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
|
"pressure_advance": "0.04",
|
|
"support_material_interface_fan_speed": "-1",
|
|
"compatible_printers": [
|
|
"Creality Hi 0.4 nozzle",
|
|
"Creality Hi 0.6 nozzle",
|
|
"Creality Hi 0.8 nozzle"
|
|
],
|
|
"filament_id": "00001"
|
|
} |