harrierpigeon 3752144995 Belt: do not refuse a brim because the prime tower setting is on ...

enable_prime_tower stays on for any multi-filament project, but a belt
printer never prints the classic tower and the belt purge prism is an
ordinary object that never takes a brim, so every brim on a multi-filament
belt print was refused for nothing.

Raised in Hanif Koh's review of #14394.

2026-10-02 01:07:42 -05:00

..

CMakeLists.txt

Read the Belt Tilt Only from the Belt G-code Header

2026-09-14 17:27:32 +08:00

fff_print_tests.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

test_cooling.cpp

Fix overhang fan control when overhang slowdown is enabled (#15158)

2026-09-01 18:07:02 -03:00

test_extrusion_entity.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_extrusion_processor.cpp

Fix slowdown for caged external overhangs (#14735)

2026-08-16 23:40:50 -03:00

test_fill.cpp

Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill (#15206)

2026-09-10 08:03:50 -03:00

test_flow.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_gcode_processor.cpp

Read the Belt Tilt Only from the Belt G-code Header

2026-09-14 17:27:32 +08:00

test_gcode_timing.cpp

Normalize the junction direction vector over XYZE (#15308)

2026-08-20 18:50:23 -03:00

test_gcodewriter.cpp

Drop references to planning docs that are not in the tree

2026-09-30 15:44:49 -05:00

test_helpers.cpp

tests: adapt belt brim coverage to upstream validation

2026-08-25 10:27:08 -05:00

test_helpers.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

test_mixed_filament.cpp

Update sublayer option check. Add validation warning for gradient mixed filament without sublayer mixing

2026-08-24 15:30:02 +08:00

test_model.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_multifilament.cpp

Fix Linux unit test failure in the wipe tower temperature trace comparison (#15161)

2026-08-07 20:26:18 +08:00

test_perimeters.cpp

Fix: Only one wall top surfaces (#14929)

2026-07-29 09:23:35 -03:00

test_print.cpp

Belt: check object height against the gantry clearance again

2026-10-02 01:07:42 -05:00

test_printobject.cpp

Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill (#15206)

2026-09-10 08:03:50 -03:00

test_skirt_brim.cpp

Belt: do not refuse a brim because the prime tower setting is on

2026-10-02 01:07:42 -05:00

test_slicing_pipeline_hook.cpp

Fix plugin configuration not taking effect, and improve the plugin config UI (#14944)

2026-07-25 20:00:56 +08:00

test_support_material.cpp

test: cover support interface generation and tree support (#15575)

2026-09-07 18:02:14 -03:00

test_tree_support.cpp

Make Tree-Support Deterministic (#15565)

2026-09-09 12:33:42 +08:00

test_trianglemesh.cpp

fff_print: a maintainable testing framework (proposal + coverage) (#14426)

2026-07-06 22:24:24 +08:00

test_wipe_tower.cpp

Verify WipeTower Footprint at Point of Generation

2026-09-09 15:45:16 +08:00