mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-03 16:22:08 +00:00
b12b9c0fdd
Jira: none Signed-off-by: qing.zhang <qing.zhang@bambulab.com> Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719 (cherry picked from commit 3f2f704676f0a8a6cf1e43e8b32fd999bcc59d31)
39 lines
1.4 KiB
JSON
39 lines
1.4 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Bambu Support W @base",
|
|
"inherits": "fdm_filament_pla",
|
|
"from": "system",
|
|
"filament_id": "GFS00",
|
|
"instantiation": "false",
|
|
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
|
"cool_plate_temp": [
|
|
"40"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"40"
|
|
],
|
|
"filament_cost": [
|
|
"69.98"
|
|
],
|
|
"filament_density": [
|
|
"1.30"
|
|
],
|
|
"filament_is_support": [
|
|
"1"
|
|
],
|
|
"filament_vendor": [
|
|
"Bambu Lab"
|
|
],
|
|
"filament_scarf_seam_type": [
|
|
"none"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"filament_category": [
|
|
"700"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
]
|
|
} |