OrcaSlicer/docs/HLSD/polygon-clipping.md

Polygon Clipping — High Level Design

Purpose and scope

Almost every stage of slicing works on 2D regions: slices, perimeters, infill areas, bridges, supports and brims are all produced by boolean operations and offsets on polygons. libslic3r does this through two interfaces, both built on the Clipper2 library vendored in deps_src/clipper2:

• ClipperUtils (src/libslic3r/ClipperUtils.hpp) takes and returns Slic3r geometry: Polygon(s), ExPolygon(s), Polyline(s), Lines and Surfaces. It provides unions, intersections, differences and xor, closed and open offsets, morphological opening and closing, variable width offsets and polyline clipping.
• ClipperZUtils (src/libslic3r/ClipperZUtils.hpp) clips paths whose vertices carry a Z value, which callers use to tag vertices with a source index or an extrusion width.

No other code calls Clipper2.

ClipperUtils declares its own JoinType, EndType, PolyFillType and ClipType enums and maps them to Clipper2's. Every call builds its own Clipper2 objects and shares no state, so slicing threads can clip concurrently.

Clipping is one of the largest costs of slicing, and nearly all of it goes through ClipperUtils. The layer is therefore designed for throughput as much as for predictable geometry.

Vendored Clipper2

deps_src/clipper2 builds the static target Clipper2. It carries four changes to the upstream sources that must be carried over when Clipper2 is updated. The namespace switch sits at the top of every header and source, the other three are marked with Orca: comments.

Change	Files	Why
Z build in its own namespace	all headers and sources, clipper2_z.cpp, clipper2_z.hpp	The library is compiled a second time with USINGZ in namespace Clipper2Lib_Z, so the 2D and the Z variants link into one binary.
Engine nodes from tbbmalloc	clipper.engine.h, clipper.engine.cpp	Vertices, active edges, output points and records, local minima and PolyTree nodes are allocated one by one. CLIPPER2_NODE_ALLOCATOR routes them through scalable_malloc, because the default heap does not scale when all slicing threads clip at once.
Concave joins at the edge crossing	clipper.offset.cpp	For closed paths, a concave corner is joined at the crossing of the two offset edges when that point lies within half of both adjacent edges. The upstream 3-point loop makes inward offsets of dense curves very slow to union.
Rounded arc steps	clipper.offset.cpp	Round joins use the rounded number of steps, not the ceiling, which keeps the vertex count of round offsets that the rest of the code is tuned for.

ClipperUtils semantics

The callers of ClipperUtils rely on a fixed set of behaviours. Where Clipper2 behaves differently by default, the wrapper adjusts it.

Booleans

• The fill rule is non-zero unless the function takes a PolyFillType. One rule applies to both subject and clip; Clipper2 has no per-operand rule.
• Collinear vertices are removed from the result. Clipper2 keeps them by default, so every boolean sets PreserveCollinear(false).
• Outer contours are CCW and holes are CW. No output contour touches itself: where one would pass twice through a vertex, it is split there into two contours.
• ExPolygons results are built from one PolyTree64 pass. An island inside a hole becomes an ExPolygon of its own.
• ApplySafetyOffset::Yes grows the clip polygons by ClipperSafetyOffset before an intersection or a difference, so that edges shared by subject and clip do not leave slivers.
• Open polylines are clipped with the non-zero rule and keep their direction.

Offsets

• Before offsetting, input vertices closer than ClipperOffsetShortestEdgeFactor × |delta| to the previously kept vertex are dropped. This bounds the work on dense contours, and the error it introduces is far below the offset distance.
• The miter limit is at least 2. For jtRound, a positive miterLimit argument is the arc tolerance, capped at |delta| / 4, and 0.25 is used otherwise. Other joins use the smaller of 0.25 and |delta| / 4 for round end caps.
• A single Polygon keeps its orientation: a CCW polygon grows with a positive delta, a CW polygon is a hole and shrinks.
• Polygons follow the same rule per path. When every CW path lies strictly inside the bounding box of a CCW path, which is the usual case of contours with their holes, all paths are offset in one Clipper2 group. Otherwise each path is offset on its own and the results are united, with the non-zero rule when growing and the positive rule when shrinking.
• ExPolygons and Surfaces are offset as one group after the contours are oriented CCW and the holes CW, whatever their input orientation.
• Zero-area paths vanish under a negative offset instead of growing.
• Polyline offsets use the requested end type. Clipper2 already unites the result, so no further union is done.

Coordinate range

Clipper2 computes intersections and slopes in doubles, which hold integers exactly only up to 2^53 (about 9e15 units, 9,000 km). Geometry passed to ClipperUtils must stay well inside that range; near the int64 limit the results shift by hundreds of units. This is why the arrange InfiniteBed is a box of ±2^50 units around its centre rather than libnest2d's infinite box, which reaches ±2.3e18.

ClipperZUtils

ZPoint is a Vec3crd, and a ZPath is a vector of them. clip_zpaths() runs one boolean with the non-zero rule on the Clipper2 Z build. The subject may be open, the clip is closed, and the result lists the closed paths before the open ones.

The Z of each output vertex follows these rules:

• An input vertex keeps its Z.
• An intersection that lies on an end point of one of the two crossing edges takes that end point's Z, preferring the subject edge.
• Any other intersection gets its Z from the callback, which receives both crossing edges, the subject edge first.

Clipper2 calls the callback only when it creates an output vertex at an intersection, not for every crossing it processes. A callback that records intersections, like ClipperZIntersectionVisitor, therefore sees only those.

The users are:

User	Z carries
Algorithm::wave_seeds() (region expansion)	source and boundary index; intersections get a negative index into the visitor's list of crossing pairs
Algorithm::split_line()	index of the source vertex; an intersection gets the negated index of its source edge, so the pieces can be put back in path order
PerimeterGenerator overhang and top-surface clipping of Arachne walls	extrusion width, interpolated along the edge at intersections
Tree support anchors in SupportCommon	index of the source contour, -1 at intersections
extrusion_paths_append()	extrusion width, turned into extrusion paths

Testing

tests/libslic3r/test_clipper_utils.cpp and test_clipper_offset.cpp cover the wrapper's booleans, orientation and offset rules. The perimeter, support and region expansion users are exercised by the slicing tests in tests/fff_print.