mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-22 16:32:40 +00:00
226e95f734
Adds the LulzBot Mini 1 (single extruder, 0.5 mm nozzle, 2.85 mm filament)
to the existing Lulzbot vendor, which previously shipped only TAZ models.
Values are taken from LulzBot's own current slicer configuration
(github.com/lulzbot3d/CuraLE) rather than estimated:
- geometry and custom g-code from resources/definitions/single_mini_mini_1.def.json
and resources/gcodes/mini_1/{mini_1_start,mini_1_end}.gcode
- filament temperatures and cooling from resources/materials/*.xml.fdm_material,
overridden by resources/quality/single_mini/<material>/*.inst.cfg
The start g-code reproduces the Mini's nozzle wipe and four-washer G29 probe,
with the filament-type temperature conditionals used by the sibling TAZ profiles.
One deliberate departure from current CuraLE: the pre-wipe retract is 30 mm,
the value used by Cura LE 4.13.x, rather than the 4 mm current CuraLE uses.
The Mini probes by electrical contact between nozzle and washer, so the nozzle
must stay clean through the wipe and all four touches. At 4 mm the melt zone
stays full and can ooze onto a washer, which caused auto-levelling failures on
hardware; 30 mm empties it. The cost is a ~24 s purge at print start.
The three filament presets follow docs/HLSD/filament_id.md rule 4: a vendor
tuning a generic material inherits Generic X @System, keeps the Generic X base
name and declares no filament_id, so identity stays with OrcaFilamentLibrary.
Their compatible_printers is the Mini alone, disjoint from Generic X @Lulzbot
(TAZ only) as rule 3 requires. They exist because temperature is a filament-scope
setting, so LulzBot's values need printer-scoped presets. All six plate types
carry the same temperature, because the Mini has a single bed and curr_bed_type
can hold a stale value carried over from another printer.
Strictly additive: no existing profile is modified, so TAZ behaviour is
unchanged and no migration is required. Lulzbot.json is bumped to 02.04.00.05.
Verified with scripts/orca_profile_tool.py check and scripts/check_profile.sh
on the full tree (profile tool, system validation, slice, filament subtypes and
custom-preset fixtures all pass), by diffing sliced output against LulzBot's own
Cura LE g-code for the same model and filament (temps, retraction, speeds and
the full wipe/probe sequence match), and by printing a 3DBenchy on a Mini 1 over
OctoPrint.
Claude-Session: https://claude.ai/code/session_012aLyqsXB7FKqwQdE2QF7Et
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
132 lines
3.3 KiB
JSON
132 lines
3.3 KiB
JSON
{
|
|
"name": "Lulzbot",
|
|
"url": "https://ohai.lulzbot.com/group/taz-6/",
|
|
"version": "02.04.00.05",
|
|
"force_update": "0",
|
|
"description": "Lulzbot configurations",
|
|
"machine_model_list": [
|
|
{
|
|
"name": "Lulzbot Mini 1",
|
|
"sub_path": "machine/Lulzbot Mini 1.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz 4 or 5",
|
|
"sub_path": "machine/Lulzbot Taz 4 or 5.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz 6",
|
|
"sub_path": "machine/Lulzbot Taz 6.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz Pro Dual",
|
|
"sub_path": "machine/Lulzbot Taz Pro Dual.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz Pro S",
|
|
"sub_path": "machine/Lulzbot Taz Pro S.json"
|
|
}
|
|
],
|
|
"process_list": [
|
|
{
|
|
"name": "fdm_process_common",
|
|
"sub_path": "process/fdm_process_common.json"
|
|
},
|
|
{
|
|
"name": "0.25mm Standard @Lulzbot Mini 1",
|
|
"sub_path": "process/0.25mm Standard @Lulzbot Mini 1.json"
|
|
},
|
|
{
|
|
"name": "0.25mm Standard @Lulzbot Taz 4 or 5",
|
|
"sub_path": "process/0.25mm Standard @Lulzbot Taz 4 or 5.json"
|
|
},
|
|
{
|
|
"name": "0.25mm Standard @Lulzbot Taz 6",
|
|
"sub_path": "process/0.25mm Standard @Lulzbot Taz 6.json"
|
|
},
|
|
{
|
|
"name": "0.25mm Standard @Lulzbot Taz Pro Dual",
|
|
"sub_path": "process/0.25mm Standard @Lulzbot Taz Pro Dual.json"
|
|
},
|
|
{
|
|
"name": "0.25mm Standard @Lulzbot Taz Pro S",
|
|
"sub_path": "process/0.25mm Standard @Lulzbot Taz Pro S.json"
|
|
},
|
|
{
|
|
"name": "0.18mm High Detail @Lulzbot Mini 1",
|
|
"sub_path": "process/0.18mm High Detail @Lulzbot Mini 1.json"
|
|
},
|
|
{
|
|
"name": "0.18mm High Detail @Lulzbot Taz 4 or 5",
|
|
"sub_path": "process/0.18mm High Detail @Lulzbot Taz 4 or 5.json"
|
|
},
|
|
{
|
|
"name": "0.18mm High Detail @Lulzbot Taz 6",
|
|
"sub_path": "process/0.18mm High Detail @Lulzbot Taz 6.json"
|
|
},
|
|
{
|
|
"name": "0.18mm High Detail @Lulzbot Taz Pro Dual",
|
|
"sub_path": "process/0.18mm High Detail @Lulzbot Taz Pro Dual.json"
|
|
},
|
|
{
|
|
"name": "0.18mm High Detail @Lulzbot Taz Pro S",
|
|
"sub_path": "process/0.18mm High Detail @Lulzbot Taz Pro S.json"
|
|
}
|
|
],
|
|
"filament_list": [
|
|
{
|
|
"name": "Generic ABS @Lulzbot",
|
|
"sub_path": "filament/Generic ABS @Lulzbot.json"
|
|
},
|
|
{
|
|
"name": "Generic ABS @Lulzbot Mini 1",
|
|
"sub_path": "filament/Generic ABS @Lulzbot Mini 1.json"
|
|
},
|
|
{
|
|
"name": "Generic PETG @Lulzbot",
|
|
"sub_path": "filament/Generic PETG @Lulzbot.json"
|
|
},
|
|
{
|
|
"name": "Generic PETG @Lulzbot Mini 1",
|
|
"sub_path": "filament/Generic PETG @Lulzbot Mini 1.json"
|
|
},
|
|
{
|
|
"name": "Generic PLA @Lulzbot",
|
|
"sub_path": "filament/Generic PLA @Lulzbot.json"
|
|
},
|
|
{
|
|
"name": "Generic PLA @Lulzbot Mini 1",
|
|
"sub_path": "filament/Generic PLA @Lulzbot Mini 1.json"
|
|
}
|
|
],
|
|
"machine_list": [
|
|
{
|
|
"name": "fdm_machine_common",
|
|
"sub_path": "machine/fdm_machine_common.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Mini 1 0.5 nozzle",
|
|
"sub_path": "machine/Lulzbot Mini 1 0.5 nozzle.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz 4 or 5 0.5 nozzle",
|
|
"sub_path": "machine/Lulzbot Taz 4 or 5 0.5 nozzle.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz 6 0.5 nozzle",
|
|
"sub_path": "machine/Lulzbot Taz 6 0.5 nozzle.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz Pro Common",
|
|
"sub_path": "machine/Lulzbot Taz Pro Common.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz Pro Dual 0.5 nozzle",
|
|
"sub_path": "machine/Lulzbot Taz Pro Dual 0.5 nozzle.json"
|
|
},
|
|
{
|
|
"name": "Lulzbot Taz Pro S 0.5 nozzle",
|
|
"sub_path": "machine/Lulzbot Taz Pro S 0.5 nozzle.json"
|
|
}
|
|
]
|
|
}
|