mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-10 14:02:47 +00:00
5b071d5013
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
39 lines
1.2 KiB
JSON
39 lines
1.2 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Elegoo PLA Basic @ECC2",
|
|
"inherits": "Elegoo PLA @base",
|
|
"from": "system",
|
|
"setting_id": "EPLABASICECC2",
|
|
"instantiation": "true",
|
|
"nozzle_temperature": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"230"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"21"
|
|
],
|
|
"pressure_advance": [
|
|
"0.04"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"4"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
],
|
|
"compatible_printers": [
|
|
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
|
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
|
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
|
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
|
]
|
|
}
|