OrcaSlicer/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @Dual.json

{
    "type": "filament",
    "from": "system",
    "instantiation": "true",
    "name": "Snapmaker PLA SnapSpeed @Dual",
    "setting_id": "39594029641",
    "inherits": "Snapmaker PLA SnapSpeed @base",
    "compatible_printers": [
      "Snapmaker A250 Dual (0.2 nozzle)",
      "Snapmaker A250 Dual (0.4 nozzle)",
      "Snapmaker A250 Dual (0.6 nozzle)", 
      "Snapmaker A250 Dual (0.8 nozzle)",
      "Snapmaker A250 Dual BKit (0.2 nozzle)",
      "Snapmaker A250 Dual BKit (0.4 nozzle)",
      "Snapmaker A250 Dual BKit (0.6 nozzle)",
      "Snapmaker A250 Dual BKit (0.8 nozzle)",
      "Snapmaker A250 Dual QS+B Kit (0.2 nozzle)",
      "Snapmaker A250 Dual QS+B Kit (0.4 nozzle)",
      "Snapmaker A250 Dual QS+B Kit (0.6 nozzle)",
      "Snapmaker A250 Dual QS+B Kit (0.8 nozzle)",
      "Snapmaker A250 Dual QSKit (0.2 nozzle)",
      "Snapmaker A250 Dual QSKit (0.4 nozzle)",
      "Snapmaker A250 Dual QSKit (0.6 nozzle)",
      "Snapmaker A250 Dual QSKit (0.8 nozzle)",
      "Snapmaker A350 Dual (0.2 nozzle)",
      "Snapmaker A350 Dual (0.4 nozzle)",
      "Snapmaker A350 Dual (0.6 nozzle)",
      "Snapmaker A350 Dual (0.8 nozzle)",
      "Snapmaker A350 Dual BKit (0.2 nozzle)",
      "Snapmaker A350 Dual BKit (0.4 nozzle)",
      "Snapmaker A350 Dual BKit (0.6 nozzle)",
      "Snapmaker A350 Dual BKit (0.8 nozzle)",
      "Snapmaker A350 Dual QS+B Kit (0.2 nozzle)",
      "Snapmaker A350 Dual QS+B Kit (0.4 nozzle)",
      "Snapmaker A350 Dual QS+B Kit (0.6 nozzle)",
      "Snapmaker A350 Dual QS+B Kit (0.8 nozzle)",
      "Snapmaker A350 Dual QSKit (0.2 nozzle)",
      "Snapmaker A350 Dual QSKit (0.4 nozzle)",
      "Snapmaker A350 Dual QSKit (0.6 nozzle)",
      "Snapmaker A350 Dual QSKit (0.8 nozzle)",
      "Snapmaker Artisan (0.2 nozzle)",
      "Snapmaker Artisan (0.4 nozzle)",
      "Snapmaker Artisan (0.6 nozzle)",
      "Snapmaker Artisan (0.8 nozzle)"
    ],
    "activate_air_filtration": [
        "0"
    ],
    "activate_chamber_temp_control": [
        "0"
    ],
    "adaptive_pressure_advance": [
        "0"
    ],
    "adaptive_pressure_advance_bridges": [
        "0"
    ],
    "adaptive_pressure_advance_model": [
        "0,0,0\n0,0,0"
    ],
    "adaptive_pressure_advance_overhangs": [
        "0"
    ],
    "additional_cooling_fan_speed": [
        "0"
    ],
    "chamber_temperature": [
        "0"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "complete_print_exhaust_fan_speed": [
        "80"
    ],
    "cool_plate_temp": [
        "35"
    ],
    "cool_plate_temp_initial_layer": [
        "35"
    ],
    "dont_slow_down_outer_wall": [
        "0"
    ],
    "during_print_exhaust_fan_speed": [
        "60"
    ],
    "enable_overhang_bridge_fan": [
        "1"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "eng_plate_temp": [
        "45"
    ],
    "eng_plate_temp_initial_layer": [
        "45"
    ],
    "fan_cooling_layer_time": [
        "60"
    ],
    "fan_max_speed": [
        "100"
    ],
    "fan_min_speed": [
        "100"
    ],
    "filament_cooling_final_speed": [
        "3.4"
    ],
    "filament_cooling_initial_speed": [
        "2.2"
    ],
    "filament_cooling_moves": [
        "4"
    ],
    "filament_cost": [
        "0"
    ],
    "filament_density": [
        "1.25"
    ],
    "filament_deretraction_speed": [
        "60"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "filament_end_gcode": [
        " "
    ],
    "filament_flow_ratio": [
        "0.99"
    ],
    "filament_is_support": [
        "0"
    ],
    "filament_loading_speed": [
        "28"
    ],
    "filament_loading_speed_start": [
        "3"
    ],
    "filament_long_retractions_when_cut": [
        "nil"
    ],
    "filament_max_volumetric_speed": [
        "18"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_multitool_ramming": [
        "0"
    ],
    "filament_multitool_ramming_flow": [
        "10"
    ],
    "filament_multitool_ramming_volume": [
        "10"
    ],
    "filament_notes": [
        ""
    ],
    "filament_ramming_parameters": [
        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
    ],
    "filament_retract_before_wipe": [
        "nil"
    ],
    "filament_retract_lift_above": [
        "nil"
    ],
    "filament_retract_lift_below": [
        "nil"
    ],
    "filament_retract_lift_enforce": [
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil"
    ],
    "filament_retraction_distances_when_cut": [
        "nil"
    ],
    "filament_retraction_length": [
        "1.5"
    ],
    "filament_retraction_minimum_travel": [
        "nil"
    ],
    "filament_retraction_speed": [
        "60"
    ],
    "filament_shrink": [
        "100%"
    ],
    "filament_shrinkage_compensation_z": [
        "100%"
    ],
    "filament_soluble": [
        "0"
    ],
    "filament_stamping_distance": [
        "0"
    ],
    "filament_stamping_loading_speed": [
        "0"
    ],
    "filament_start_gcode": [
        " "
    ],
    "filament_toolchange_delay": [
        "0"
    ],
    "filament_type": [
        "PLA"
    ],
    "filament_unloading_speed": [
        "90"
    ],
    "filament_unloading_speed_start": [
        "100"
    ],
    "filament_vendor": [
        "Snapmaker"
    ],
    "filament_wipe": [
        "nil"
    ],
    "filament_wipe_distance": [
        "nil"
    ],
    "filament_z_hop": [
        "0.2"
    ],
    "filament_z_hop_types": [
        "Normal Lift"
    ],
    "full_fan_speed_layer": [
        "0"
    ],
    "hot_plate_temp": [
        "45"
    ],
    "hot_plate_temp_initial_layer": [
        "45"
    ],
    "idle_temperature": [
        "0"
    ],
    "nozzle_temperature": [
        "200"
    ],
    "nozzle_temperature_initial_layer": [
        "230"
    ],
    "nozzle_temperature_range_high": [
        "240"
    ],
    "nozzle_temperature_range_low": [
        "190"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "overhang_fan_threshold": [
        "95%"
    ],
    "pellet_flow_coefficient": [
        "0.4157"
    ],
    "pressure_advance": [
        "0.04"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "required_nozzle_HRC": [
        "0"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "slow_down_layer_time": [
        "16"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "support_material_interface_fan_speed": [
        "-1"
    ],
    "temperature_vitrification": [
        "100"
    ],
    "textured_cool_plate_temp": [
        "40"
    ],
    "textured_cool_plate_temp_initial_layer": [
        "40"
    ],
    "textured_plate_temp": [
        "45"
    ],
    "textured_plate_temp_initial_layer": [
        "45"
    ]
}