mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-15 11:51:33 +00:00
Eric McCann
83ee4f4476
This is the bulk of the profile changes for U1 that led to the cooling catiant connection. The ugly end gcode is used by the printer's UI to complain if normal nozzle is installed but the file was sliced for highflow. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
100 lines
1.9 KiB
JSON
100 lines
1.9 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
|
|
"renamed_from": "0.20 Strength Snapmaker U1 (0.4 nozzle);0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle);0.20 Strength Snapmaker U1 (0.4 High Flow nozzle)",
|
|
"inherits": "fdm_process_U1_0.20",
|
|
"from": "system",
|
|
"setting_id": "bYnMOZxTq83EwIyd",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
|
"outer_wall_speed": [
|
|
"60",
|
|
"500",
|
|
"60",
|
|
"500",
|
|
"60",
|
|
"500",
|
|
"60",
|
|
"500"
|
|
],
|
|
"sparse_infill_density": "25%",
|
|
"wall_loops": "6",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)"
|
|
],
|
|
"ooze_prevention": "1",
|
|
"prime_tower_width": "30",
|
|
"prime_volume": "45",
|
|
"slowdown_for_curled_perimeters": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"standby_temperature_delta": "-150",
|
|
"wipe_tower_filament": "0",
|
|
"prime_tower_brim_width": "5",
|
|
"wipe_tower_cone_angle": "15",
|
|
"wipe_tower_extra_spacing": "120%",
|
|
"enable_arc_fitting": "0",
|
|
"precise_outer_wall": "1",
|
|
"support_type": "tree(auto)",
|
|
"wipe_tower_extra_rib_length": "8",
|
|
"wipe_tower_wall_type": "rib",
|
|
"gap_fill_target": "topbottom",
|
|
"print_extruder_id": [
|
|
"1",
|
|
"1",
|
|
"2",
|
|
"2",
|
|
"3",
|
|
"3",
|
|
"4",
|
|
"4"
|
|
],
|
|
"print_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow",
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow",
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow",
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"internal_solid_infill_speed": [
|
|
"250",
|
|
"600",
|
|
"250",
|
|
"600",
|
|
"250",
|
|
"600",
|
|
"250",
|
|
"600"
|
|
],
|
|
"inner_wall_speed": [
|
|
"300",
|
|
"600",
|
|
"300",
|
|
"600",
|
|
"300",
|
|
"600",
|
|
"300",
|
|
"600"
|
|
],
|
|
"sparse_infill_speed": [
|
|
"270",
|
|
"600",
|
|
"270",
|
|
"600",
|
|
"270",
|
|
"600",
|
|
"270",
|
|
"600"
|
|
]
|
|
}
|