mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 09:02:06 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
21 lines
3.1 KiB
JSON
21 lines
3.1 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_a250",
|
|
"inherits": "fdm_linear2",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"bed_model": "Snapmaker A250_bed.stl",
|
|
"bed_texture": "Snapmaker A250_texture.svg",
|
|
"printable_height": "230",
|
|
"printer_notes": "PRINTER_MODEL_SNAPMAKER_A250\n",
|
|
"printable_area": [
|
|
"0x0",
|
|
"230x0",
|
|
"230x250",
|
|
"0x250"
|
|
],
|
|
"machine_start_gcode": "; Model: Snapmaker A250\n; Update: 20240922\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z153 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\n{if 0==1} ; boundary check(for dual/quick swap kit), not recommanded if there are any clamps \n G0 X0\n G0 Z0.2 F960.0\n G0 Y0 F3420.0\n G0 X230\n G0 Y250\n G0 X0\n G0 Y0\n{endif}\n\nM83\n{if 1==1 && max(hot_plate_temp_initial_layer[initial_extruder], hot_plate_temp[initial_extruder]) >= 90}\nG0 Z0.06\nG92 Z0 ;reset z\n{endif}\n\n; flush initial nozzle\nT[initial_extruder]\nM104 S{max(250, min(290, nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 15))}; common flush temp\nG0 Z1.6 F960.0\nG0 X{( initial_extruder % 2 == 0 ? 100.0 : 130.0 )} F3420.0\nG0 Y0 F3420.0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 15))} C2 W1\nG1 E15 F80.0\nG92 E0\n\nM106 S{min(255, (fan_max_speed[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 10) * 2.55)}\n\nM104 S{nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))] + 5}\n\nG1 E9.0 F200\nG92 E0\nG1 E6.0 Z4.6 F200\nG92 E0\n\nG0 Z5.6 F200\nM107\n\nG0 X{( initial_extruder % 2 == 0 ? 55.0 : 175.0 )} F3420.0\nG0 Z0.3 F960.0\nM109 S{nozzle_temperature_initial_layer[(initial_extruder % 2 == 0 ? min(initial_extruder + initial_extruder, 63) : max(initial_extruder - (1-initial_extruder), 0))]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X{( initial_extruder % 2 == 0 ? 0 : 230 )} E3.42995 F3420.0\nG92 E0\n\nG1 E-{retraction_length[initial_extruder]} F200\nG92 E0\nG0 Y20 F3420.0\n\n; ready [plate_name]",
|
|
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-5 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
|
|
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
|
|
}
|