mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 09:02:06 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
126 lines
3.9 KiB
JSON
126 lines
3.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_machine_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"printer_technology": "FFF",
|
|
"printer_settings_id": "fdm_machine_common",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"210x0",
|
|
"210x150",
|
|
"0x150"
|
|
],
|
|
"thumbnails": [
|
|
"16x16"
|
|
],
|
|
"auxiliary_fan": "1",
|
|
"change_filament_gcode": "M18 E",
|
|
"deretraction_speed": [
|
|
"50"
|
|
],
|
|
"extruder_clearance_height_to_rod": "19",
|
|
"extruder_clearance_radius": "100",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_speedup_time": "1",
|
|
"host_type": "esp3d",
|
|
"long_retractions_when_cut": [
|
|
"0"
|
|
],
|
|
"machine_end_gcode": "; ===== ORCA END GCODE =====\nM400\nM83\nG92 E0\nG1 E-17 F1800 ; retract BEFORE any moves or power changes\n\n; Now lift and park\nG91\nG1 Z2 F2000\nG90\nG1 X100 Y160 F3000 ; parking point\n\n; Power down in order\nM104 T0 S0\nM104 T1 S0\nM106 S50 ; keep fan at ~50% while cooling (adjust if desired)\n; (Leave steppers on by omitting M84)\n; ===== END ORCA END GCODE =====\n",
|
|
"machine_load_filament_time": "0.5",
|
|
"machine_max_acceleration_e": [
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"400"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"400"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"300"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"12"
|
|
],
|
|
"machine_start_gcode": "; ===== ORCA START GCODE =====\n; minx:{first_layer_print_min[0]}\n; miny:{first_layer_print_min[1]}\n; maxx:{first_layer_print_max[0]}\n; maxy:{first_layer_print_max[1]}\n; used_0:{is_extruder_used[0]}\n; used_1:{is_extruder_used[1]}\n\n; Heaters\n{if is_extruder_used[0]}M104 T0 S{first_layer_temperature[0]}{endif}\n{if !is_extruder_used[0]}M104 T0 S150{endif}\n{if is_extruder_used[1]}M104 T1 S{first_layer_temperature[1]}{endif}\n{if !is_extruder_used[1]}M104 T1 S150{endif}\nM140 S0\nM106 S50\n\n; Home and clearance\nG28 X Y\nG28 Z\nG91\nG1 Z10 F1200 ; lift 10mm\nG90\n\n; Bed wait (dummy)\nM190 S0\n\n; Wait for target temps\n{if is_extruder_used[0]}M109 T0 S{first_layer_temperature[0]}{endif}\n{if is_extruder_used[1]}M109 T1 S{first_layer_temperature[1]}{endif}\n\n; Absolute XYZ / Relative E\nG90\nM83\n\n; ===== Dynamic Bed Leveling ====\nT0\nG1 Z3 F3000\nG1 X15 Y15 F6000\nG1 Z0.25 F1000; Otherwise Orca displays with a 3mm height\n; Single probe touch\nG30\nM420 S1\n; Bias the contact as -0.25 and fix Z-zero\nG92 Z-0.25 ; probed contact now treated as Z = -0.25\nG1 Z0.3 F300\n\n; ===== PRIME / TWO-LINE WIPES (sparse, no air extrude) =====\n\n; --- Tool 0: lines at Y=5 and Y=6 ---\n{if is_extruder_used[0]}\nT0\nG92 E0\nG1 X20 Y5 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y6.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; --- Tool 1: lines at Y=7 and Y=8 ---\n{if is_extruder_used[1]}\nT1\nG92 E0\nG1 X20 Y7 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y8.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; Activate initial tool (no retracts; Orca starts immediately)\nT{initial_extruder}\nG92 E0\n; ===== END ORCA START GCODE =====\n",
|
|
"machine_tool_change_time": "0.5",
|
|
"machine_unload_filament_time": "0.5",
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.1"
|
|
],
|
|
"retract_before_wipe": [
|
|
"100%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"17"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"0"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_distances_when_cut": [
|
|
"18"
|
|
],
|
|
"retraction_length": [
|
|
"4.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"2.5"
|
|
],
|
|
"retraction_speed": [
|
|
"60"
|
|
],
|
|
"single_extruder_multi_material": "0",
|
|
"travel_slope": [
|
|
"45"
|
|
],
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"z_hop_types": [
|
|
"Normal Lift"
|
|
]
|
|
}
|