mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 00:52:04 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
25 lines
807 B
JSON
25 lines
807 B
JSON
{
|
|
"type": "process",
|
|
"name": "0.12mm Fine @Flashforge AD5M Pro 0.4 Nozzle",
|
|
"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"compatible_printers": [
|
|
"Flashforge Adventurer 5M Pro 0.4 Nozzle"
|
|
],
|
|
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
|
"post_process": "",
|
|
"layer_height": "0.12",
|
|
"bridge_flow": "0.95",
|
|
"infill_wall_overlap": "30%",
|
|
"initial_layer_print_height": "0.3",
|
|
"print_settings_id": "0.12mm Fine @Flashforge AD5M Pro 0.4 Nozzle",
|
|
"support_base_pattern_spacing": "2",
|
|
"support_bottom_interface_spacing": "0.3",
|
|
"support_bottom_z_distance": "0.15",
|
|
"support_interface_spacing": "0.3",
|
|
"support_line_width": "0.4",
|
|
"support_top_z_distance": "0.15",
|
|
"skirt_loops": "0"
|
|
}
|