mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 09:02:06 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
189 lines
9.6 KiB
JSON
189 lines
9.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_toolchanger_common",
|
|
"inherits": "fdm_klipper_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"gcode_flavor": "klipper",
|
|
"single_extruder_multi_material": "0",
|
|
"default_filament_profile": [
|
|
"Generic PLA @MyToolChanger"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @MyToolChanger",
|
|
"max_layer_height": [
|
|
"0.32",
|
|
"0.32",
|
|
"0.32",
|
|
"0.32",
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08",
|
|
"0.08",
|
|
"0.08",
|
|
"0.08",
|
|
"0.08"
|
|
],
|
|
"deretraction_speed": [
|
|
"30",
|
|
"30",
|
|
"30",
|
|
"30",
|
|
"30"
|
|
],
|
|
"extruder_colour": [
|
|
"#FCE94F",
|
|
"#FCE94F",
|
|
"#FCE94F",
|
|
"#FCE94F",
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0",
|
|
"0x0",
|
|
"0x0",
|
|
"0x0",
|
|
"0x0"
|
|
],
|
|
"long_retractions_when_cut": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4",
|
|
"0.4",
|
|
"0.4",
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%",
|
|
"70%",
|
|
"70%",
|
|
"70%",
|
|
"70%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2",
|
|
"2",
|
|
"2",
|
|
"2",
|
|
"2"
|
|
],
|
|
"retract_lift_above": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces",
|
|
"All Surfaces",
|
|
"All Surfaces",
|
|
"All Surfaces",
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0",
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1"
|
|
],
|
|
"retraction_distances_when_cut": [
|
|
"18",
|
|
"18",
|
|
"18",
|
|
"18",
|
|
"18"
|
|
],
|
|
"retraction_length": [
|
|
"0.8",
|
|
"0.8",
|
|
"0.8",
|
|
"0.8",
|
|
"0.8"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30",
|
|
"30",
|
|
"30",
|
|
"30",
|
|
"30"
|
|
],
|
|
"travel_slope": [
|
|
"3",
|
|
"3",
|
|
"3",
|
|
"3",
|
|
"3"
|
|
],
|
|
"wipe": [
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1",
|
|
"1"
|
|
],
|
|
"z_hop": [
|
|
"0.4",
|
|
"0.4",
|
|
"0.4",
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"z_hop_types": [
|
|
"Normal Lift",
|
|
"Normal Lift",
|
|
"Normal Lift",
|
|
"Normal Lift",
|
|
"Normal Lift"
|
|
],
|
|
"purge_in_prime_tower": "0",
|
|
"machine_pause_gcode": "M601",
|
|
"change_filament_gcode": "",
|
|
"machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n",
|
|
"scan_first_layer": "0",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0"
|
|
}
|