Files
OrcaSlicer/deps_src/libigl/igl/active_set.h
Donovan Baarda dc5897d7b5 Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)
* Update eigen from v3.3.7 to v5.0.1.

This updates eigen from v3.3.7 released on  December 11, 2018-12-11 to v5.0.1
released on 2025-11-11. There have be a large number of bug-fixes,
optimizations, and improvements between these releases. See the details at;

https://gitlab.com/libeigen/eigen/-/releases

It retains the previous custom minimal `CMakeLists.txt`, and adds a
README-OrcaSlicer.md that explains what version and parts of the upstream
eigen release have been included, and where the full release can be found.

* Update libigl from v2.0.0 (or older) to v2.6.0.

This updates libigl from what was probably v2.0.0 released on 2018-10-16 to
v2.6.0 released on 2025-05-15. It's possible the old version was even older
than that but there is no version indicators in the code and I ran out of
patience identifying missing changes and only went back as far as v2.0.0.

There have been a large number of bug-fixes, optimizations, and improvements
between these versions. See the following for details;

https://github.com/libigl/libigl/releases

I retained the minimal custom `CMakeLists.txt`, added `README.md` from the
libigl distribution which identifies the version, and added a
README-OrcaSlicer.md that details the version and parts that have been
included.

* Update libslic3r for libigl v2.6.0 changes.

This updates libslic3r for all changes moving to eigen v5.0.1 and libigl
v2.6.0. Despite the large number of updates to both dependencies, no changes
were required for the eigen update, and only one change was required for the
libigl update.

For libigl, `igl::Hit` was changed to a template taking the Scalar type to
use. Previously it was hard-coded to `float`, so to minimize possible impact
I've updated all places it is used from `igl::Hit` to `igl::Hit<float>`.

* Add compiler option `-DNOMINMAX` for libigl with MSVC.

MSVC by default defines `min(()` and `max()` macros that break
`std::numeric_limits<>::max()`. The upstream cmake that we don't include
adds `-DNOMINMAX` for the libigl module when compiling with MSVC, so we need
to add the same thing here.

* Fix src/libslic3r/TriangleMeshDeal.cpp for the unmodified upstream libigl.

This fixes `TriangleMeshDeal.cpp` to work with the unmodified upstream
libigl v2.6.0. loop.{h,cpp} implementation.

This file and feature was added in PR "BBS Port: Mesh Subdivision" (#12150)
which included changes to `loop.{h,cpp}` in the old version of libigl. This PR
avoids modifying the included dependencies, and uses the updated upstream
versions of those files without any modifications, which requires fixing
TriangleMeshDeal.cpp to work with them.

In particular, the modifications made to `loop.{h,cpp}` included changing the
return type from void to bool, adding additional validation checking of the
input meshes, and returning false if they failed validation. These added
checks looked unnecessary and would only have caught problems if the input
mesh was very corrupt.

To make `TriangleMeshDeal.cpp` work without this built-in checking
functionality, I removed checking/handling of any `false` return value.

There was also a hell of a lot of redundant copying and casting back and forth
between float and double, so I cleaned that up. The input and output meshs use
floats for the vertexes, and there would be no accuracy benefits from casting
to and from doubles for the simple weighted average operations done by
igl::loop(). So this just uses `Eigen:Map` to use the original input mesh
vertex data directly without requiring any copy or casting.

* Move eigen from included `deps_src` to externaly fetched `deps`.

This copys what PrusaSlicer did and moved it from an included dependency under
`deps_src` to an externaly fetched dependency under `deps`. This requires
updating some `CMakeList.txt` configs and removing the old and obsolete
`cmake/modules/FindEigen3.cmake`. The details of when this was done in
PrusaSlicer and the followup fixes are at;

* 21116995d7
* https://github.com/prusa3d/PrusaSlicer/issues/13608
* https://github.com/prusa3d/PrusaSlicer/pull/13609
* e3c277b9ee

For some reason I don't fully understand this also required fixing
`src/slic3r/GUI/GUI_App.cpp` by adding `#include <boost/nowide/cstdio.hpp>` to
fix an `error: ‘remove’ is not a member of ‘boost::nowide'`. The main thing I
don't understand is how it worked before. Note that this include is in the
PrusaSlicer version of this file, but it also significantly deviates from what
is currently in OrcaSlicer in many other ways.

* Whups... I missed adding the deps/Eigen/Eigen.cmake file...

* Tidy some whitespace indenting in CMakeLists.txt.

* Ugh... tabs indenting needing fixes.

* Change the include order of deps/Eigen.

It turns out that although Boost includes some references to Eigen, Eigen also
includes some references to Boost for supporting some of it's additional
numeric types.

I don't think it matters much since we are not using these features, but I
think technically its more correct to say Eigen depends on Boost than the
other way around, so I've re-ordered them.

* Add source for Eigen 5.0.1 download to flatpak yml config.

* Add explicit `DEPENDS dep_Boost to deps/Eigen.

I missed this before. This ensures we don't rely on include orders to make
sure Boost is installed before we configure Eigen.

* Add `DEPENDS dep_Boost dep_GMP dep_MPFR` to deps/Eigen.

It turns out Eigen can also use GMP and MPFR for multi-precision and
multi-precision-rounded numeric types if they are available.

Again, I don't think we are using these so it doesn't really matter, but it is
technically correct and ensures they are there if we ever do need them.

* Fix deps DEPENDENCY ordering for GMP, MPFR, Eigen, and CGAL.

I think this is finally correct. Apparently CGAL also optionally depends on
Eigen, so the correct dependency order from lowest to highest is GMP, MPFR, Eigen, and CGAL.

---------

Co-authored-by: Donovan Baarda <dbaarda@google.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
2026-05-12 15:09:13 +08:00

121 lines
4.3 KiB
C++

// This file is part of libigl, a simple c++ geometry processing library.
//
// Copyright (C) 2013 Alec Jacobson <alecjacobson@gmail.com>
//
// This Source Code Form is subject to the terms of the Mozilla Public License
// v. 2.0. If a copy of the MPL was not distributed with this file, You can
// obtain one at http://mozilla.org/MPL/2.0/.
#ifndef IGL_ACTIVE_SET_H
#define IGL_ACTIVE_SET_H
#include "igl_inline.h"
#include "SolverStatus.h"
#include <Eigen/Core>
#include <Eigen/Sparse>
namespace igl
{
struct active_set_params;
///
/// Minimize convex quadratic energy subject to linear inequality constraints
///
/// min ½ Zᵀ A Z + Zᵀ B + constant
/// Z
/// subject to
/// Aeq Z = Beq
/// Aieq Z <= Bieq
/// lx <= Z <= ux
/// Z(known) = Y
///
/// that Z(known) = Y, optionally also subject to the constraints Aeq*Z = Beq,
/// and further optionally subject to the linear inequality constraints that
/// Aieq*Z <= Bieq and constant inequality constraints lx <= x <= ux
///
/// @param[in] A n by n matrix of quadratic coefficients
/// @param[in] B n by 1 column of linear coefficients
/// @param[in] known list of indices to known rows in Z
/// @param[in] Y list of fixed values corresponding to known rows in Z
/// @param[in] Aeq meq by n list of linear equality constraint coefficients
/// @param[in] Beq meq by 1 list of linear equality constraint constant values
/// @param[in] Aieq mieq by n list of linear inequality constraint coefficients
/// @param[in] Bieq mieq by 1 list of linear inequality constraint constant values
/// @param[in] lx n by 1 list of lower bounds [] implies -Inf
/// @param[in] ux n by 1 list of upper bounds [] implies Inf
/// @param[in] params struct of additional parameters (see below)
/// @param[in,out] Z if not empty, is taken to be an n by 1 list of initial guess values. Set to solution on output.
/// @return true on success, false on error
///
/// \note Benchmark: For a harmonic solve on a mesh with 325K facets, matlab 2.2
/// secs, igl/min_quad_with_fixed.h 7.1 secs
///
/// \pre rows of [Aeq;Aieq] **must** be linearly independent. Should be
/// using QR decomposition otherwise:
/// https://v8doc.sas.com/sashtml/ormp/chap5/sect32.htm
///
/// \warning This solver is fairly experimental. It works reasonably well for
/// bbw problems but doesn't generalize well to other problems. NASOQ and
/// OSQP are better general purpose solvers.
template <
typename AT,
typename DerivedB,
typename Derivedknown,
typename DerivedY,
typename AeqT,
typename DerivedBeq,
typename AieqT,
typename DerivedBieq,
typename Derivedlx,
typename Derivedux,
typename DerivedZ
>
IGL_INLINE igl::SolverStatus active_set(
const Eigen::SparseMatrix<AT>& A,
const Eigen::MatrixBase<DerivedB> & B,
const Eigen::MatrixBase<Derivedknown> & known,
const Eigen::MatrixBase<DerivedY> & Y,
const Eigen::SparseMatrix<AeqT>& Aeq,
const Eigen::MatrixBase<DerivedBeq> & Beq,
const Eigen::SparseMatrix<AieqT>& Aieq,
const Eigen::MatrixBase<DerivedBieq> & Bieq,
const Eigen::MatrixBase<Derivedlx> & lx,
const Eigen::MatrixBase<Derivedux> & ux,
const igl::active_set_params & params,
Eigen::PlainObjectBase<DerivedZ> & Z
);
};
#include "EPS.h"
/// Input parameters controling active_set
///
/// \fileinfo
struct igl::active_set_params
{
/// Auu_pd whether Auu is positive definite {false}
bool Auu_pd;
/// max_iter Maximum number of iterations (0 = Infinity, {100})
int max_iter;
/// inactive_threshold Threshold on Lagrange multiplier values to determine
/// whether to keep constraints active {EPS}
double inactive_threshold;
/// constraint_threshold Threshold on whether constraints are violated (0
/// is perfect) {EPS}
double constraint_threshold;
/// solution_diff_threshold Threshold on the squared norm of the difference
/// between two consecutive solutions {EPS}
double solution_diff_threshold;
/// @private
active_set_params():
Auu_pd(false),
max_iter(100),
inactive_threshold(igl::DOUBLE_EPS),
constraint_threshold(igl::DOUBLE_EPS),
solution_diff_threshold(igl::DOUBLE_EPS)
{};
};
#ifndef IGL_STATIC_LIBRARY
# include "active_set.cpp"
#endif
#endif