juli/OrcaSlicer
1
1 Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-10-19 13:41:03 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
hanif/python-bytecode-bundle
OrcaSlicer/resources/profiles/Vivedino/machine/Xplorer IDEX 0.4 nozzle.json
T
Clifford GarwoodandClaude Opus 5 bfac55335a Give each Xplorer toolhead its own color 
Every extruder on every model carried the same yellow. The key exists so the
plater, the preview and the filament mapping can tell toolheads apart, which
matters most on the machine this bundle exists to demonstrate: four independent
heads that were indistinguishable at a glance.

Yellow, blue, plum and orange, assigned in tool order, so the two-tool models
take the first two. Red and green are avoided as a pair because they are the
hardest to separate for the commonest color vision deficiency.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-29 20:35:42 -04:00

255 lines
4.9 KiB
JSON
Raw Permalink Blame History

{
"type": "machine",
"name": "Xplorer IDEX 0.4 nozzle",
"inherits": "Xplorer common",
"from": "system",
"setting_id": "lOZ2qJY7SsNRW03z",
"instantiation": "true",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
"default_nozzle_volume_type": [
"High Flow",
"High Flow"
],
"default_print_profile": "0.20mm Standard @Xplorer 0.4",
"deretraction_speed": [
"120",
"120"
],
"extruder_colour": [
"#FCE94F",
"#729FCF"
],
"extruder_offset": [
"0x0",
"0x0"
],
"extruder_type": [
"Direct Drive",
"Direct Drive"
],
"extruder_variant_list": [
"Direct Drive High Flow",
"Direct Drive High Flow"
],
"imex_mode_active_tools": [
"0:P",
"0:P,1:C",
"0:P,1:M"
],
"imex_mode_gcodes": [
"SET_PRINT_MODE MODE=PRIMARY",
"SET_PRINT_MODE MODE=COPY",
"SET_PRINT_MODE MODE=MIRROR"
],
"imex_mode_names": [
"primary",
"copy",
"mirror"
],
"imex_nozzle_clearance_x": "40",
"imex_tool_layout": "front-left",
"is_imex": "1",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
"long_retractions_when_cut": [
"0",
"0"
],
"machine_max_acceleration_e": [
"6000",
"5000",
"6000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"2500",
"5000",
"2500"
],
"machine_max_acceleration_retracting": [
"5000",
"5000",
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"5000",
"2500",
"5000",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"2500",
"5000",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"2500",
"5000",
"2500"
],
"machine_max_acceleration_z": [
"100",
"50",
"100",
"50"
],
"machine_max_jerk_e": [
"2.5",
"1.25",
"2.5",
"1.25"
],
"machine_max_jerk_x": [
"5",
"2.5",
"5",
"2.5"
],
"machine_max_jerk_y": [
"5",
"2.5",
"5",
"2.5"
],
"machine_max_jerk_z": [
"0.4",
"0.2",
"0.4",
"0.2"
],
"machine_max_junction_deviation": [
"0",
"0",
"0",
"0"
],
"machine_max_speed_e": [
"120",
"60",
"120",
"60"
],
"machine_max_speed_x": [
"300",
"150",
"300",
"150"
],
"machine_max_speed_y": [
"300",
"150",
"300",
"150"
],
"machine_max_speed_z": [
"40",
"20",
"40",
"20"
],
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 X280.1 Y3.0 Z0.38 F5000.0 \nG1 X100.1 Y3.0 Z0.38 F1500.0 E15 \nG1 X100.1 Y3.4 Z0.38 F5000.0 \nG1 X280.1 Y3.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 X100.1 Y2.0 Z0.38 F5000.0 \nG1 X280.1 Y2.0 Z0.38 F1500.0 E15 \nG1 X280.1 Y2.4 Z0.38 F5000.0 \nG1 X100.1 Y2.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.04",
"0.04"
],
"nozzle_diameter": [
"0.4",
"0.4"
],
"nozzle_type": [
"hardened_steel",
"hardened_steel"
],
"nozzle_volume": [
"0",
"0"
],
"printable_height": "401",
"printer_extruder_id": [
"1",
"2"
],
"printer_extruder_variant": [
"Direct Drive High Flow",
"Direct Drive High Flow"
],
"printer_model": "Xplorer IDEX",
"printer_variant": "0.4",
"retract_before_wipe": [
"70%",
"70%"
],
"retract_length_toolchange": [
"2",
"2"
],
"retract_lift_above": [
"0.2",
"0.2"
],
"retract_lift_below": [
"400",
"400"
],
"retract_lift_enforce": [
"All Surfaces",
"All Surfaces"
],
"retract_restart_extra": [
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0"
],
"retract_when_changing_layer": [
"1",
"1"
],
"retraction_distances_when_cut": [
"18",
"18"
],
"retraction_length": [
"1.35",
"1.35"
],
"retraction_minimum_travel": [
"2",
"2"
],
"retraction_speed": [
"120",
"120"
],
"travel_slope": [
"1",
"1"
],
"wipe": [
"1",
"1"
],
"wipe_distance": [
"1",
"1"
],
"z_hop": [
"1",
"1"
],
"z_hop_types": [
"Normal Lift",
"Normal Lift"
]
}
Reference in new issue View Git Blame Copy Permalink