mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-19 13:41:03 +00:00
harrierpigeon
56f5ff8128
main's profile checks reject the belt bundles: their filaments override variant keys with one value under the library's six-variant presets, the copied vendor commons carry keys the slicer no longer reads, the IR3 V2 and BabyBelt Pro machine limits miss the silent-mode entry, and the Custom belt base pins printer_extruder_id to one entry under a three-variant list. - The BabyBelt Pro and IR3 V2 filaments name the one extruder variant their printers have, as the other vendors' filaments built on the library do, and drop every override that only repeats the library value (diameter, density, temperature range, most of the fan settings...). The eSUN filaments inherit the narrowed list. - The Custom belt base inherits printer_extruder_id from its base. - normalize drops silent_mode, adaptive_layer_height and tree_support_with_infill; fix-variant gives the machine limits their silent-mode entry, which they read from the single value before. - The IR3 V2 drops two limits equal to its base in both modes. - Custom's index is regenerated and all three vendor versions bumped. Flattening every belt preset before and after, nothing a belt printer reads changes: printer_extruder_id is one id per variant, all 1. Printcepts and IdeaFormer keep their own machine and process bases: only filaments can inherit across vendor bundles (from OrcaFilamentLibrary), so they cannot build on the Custom belt printer.
99 lines
3.3 KiB
JSON
99 lines
3.3 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "IdeaFormer IR3 V2 0.4 nozzle",
|
|
"inherits": "fdm_belt_common",
|
|
"from": "system",
|
|
"setting_id": "MDQZgwRgg72lmjtu",
|
|
"instantiation": "true",
|
|
"printer_model": "IdeaFormer IR3 V2",
|
|
"printer_variant": "0.4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"250x0",
|
|
"250x2000",
|
|
"0x2000"
|
|
],
|
|
"printable_height": "250",
|
|
"belt_printer_infinite_y": "1",
|
|
"thumbnails": [
|
|
"48x48/PNG",
|
|
"300x300/PNG"
|
|
],
|
|
"default_filament_profile": [
|
|
"Generic PLA @IdeaFormer IR3 V2"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
|
|
"use_relative_e_distances": "1",
|
|
"machine_max_acceleration_extruding": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"9000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"retraction_length": [
|
|
"2"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"retract_lift_below": [
|
|
"300"
|
|
],
|
|
"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
|
|
"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
|
|
"machine_pause_gcode": "PAUSE",
|
|
"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
|
|
}
|