mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
228 lines
5.3 KiB
JSON
228 lines
5.3 KiB
JSON
{
|
|
"adaptive_bed_mesh_margin": "0",
|
|
"auxiliary_fan": "0",
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"bed_mesh_max": "99999,99999",
|
|
"bed_mesh_min": "-99999,-99999",
|
|
"bed_mesh_probe_distance": "50,50",
|
|
"bed_temperature_formula": "by_highest_temp",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"default_bed_type": "Textured PEI Plate",
|
|
"default_filament_profile": [
|
|
"Generic PLA @System"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @OpenEYE Peacock V2",
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"disable_m73": "0",
|
|
"emit_machine_limits_to_gcode": "0",
|
|
"enable_filament_ramming": "0",
|
|
"enable_long_retraction_when_cut": "0",
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_lid": "34",
|
|
"extruder_clearance_height_to_rod": "34",
|
|
"extruder_clearance_radius": "47",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"from": "system",
|
|
"gcode_flavor": "klipper",
|
|
"head_wrap_detect_zone": [],
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"printer_agent": "moonraker",
|
|
"inherits": "fdm_machine_common",
|
|
"instantiation": "false",
|
|
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n_MMU_UPDATE_HEIGHT",
|
|
"long_retractions_when_cut": [
|
|
"0"
|
|
],
|
|
"machine_end_gcode": "MMU_END\nEND_PRINT",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"9000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3",
|
|
"3"
|
|
],
|
|
"machine_max_junction_deviation": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"30",
|
|
"30"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\" MESH_MIN={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} MESH_MAX={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE_MARGIN={adaptive_bed_mesh_margin}\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
|
|
"machine_tool_change_time": "0",
|
|
"machine_unload_filament_time": "0",
|
|
"manual_filament_change": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"max_resonance_avoidance_speed": "120",
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"min_resonance_avoidance_speed": "70",
|
|
"name": "fdm_openeye_common",
|
|
"nozzle_diameter": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"nozzle_height": "2.5",
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "brass",
|
|
"nozzle_volume": "0",
|
|
"parking_pos_retraction": "0",
|
|
"pellet_modded_printer": "0",
|
|
"preferred_orientation": "0",
|
|
"print_host": "openeye3dpi.local",
|
|
"printable_height": "250",
|
|
"printer_settings_id": "",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printing_by_object_gcode": "",
|
|
"purge_in_prime_tower": "1",
|
|
"resonance_avoidance": "0",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"180",
|
|
"180"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_distances_when_cut": [
|
|
"18"
|
|
],
|
|
"retraction_length": [
|
|
"1"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "0",
|
|
"support_chamber_temp_control": "0",
|
|
"support_multi_bed_types": "1",
|
|
"template_custom_gcode": "",
|
|
"thumbnails": "48x48/PNG, 300x300/PNG",
|
|
"thumbnails_format": "PNG",
|
|
"time_cost": "0",
|
|
"time_lapse_gcode": "",
|
|
"travel_slope": [
|
|
"3"
|
|
],
|
|
"type": "machine",
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"1"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
],
|
|
"z_offset": "0"
|
|
}
|