mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
205 lines
4.8 KiB
JSON
205 lines
4.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "InfiMech EX 0.4 nozzle",
|
|
"inherits": "fdm_klipper_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "InfiMech EX",
|
|
"auxiliary_fan": "1",
|
|
"bed_exclude_area": [
|
|
"242x0",
|
|
"250x0",
|
|
"250x30",
|
|
"242x30"
|
|
],
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "5",
|
|
"cooling_tube_retraction": "91.5",
|
|
"default_filament_profile": [
|
|
"InfiMech PLA Basic @EX"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @InfiMech EX",
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"enable_filament_ramming": "1",
|
|
"extra_loading_move": "-2",
|
|
"extruder_clearance_height_to_lid": "69",
|
|
"extruder_clearance_height_to_rod": "69",
|
|
"extruder_clearance_radius": "55",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"high_current_on_filament_swap": "0",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
|
"machine_end_gcode": "PRINT_END",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"200"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3",
|
|
"0.4"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30",
|
|
"25"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"600",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"600",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"12"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
|
"machine_unload_filament_time": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "brass",
|
|
"nozzle_volume": "151.32",
|
|
"parking_pos_retraction": "92",
|
|
"print_host_webui": "",
|
|
"printable_area": [
|
|
"0x0",
|
|
"250x0",
|
|
"250x250",
|
|
"0x250"
|
|
],
|
|
"printable_height": "205",
|
|
"printer_notes": "",
|
|
"printer_settings_id": "InfiMech EX 0.4 nozzle",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printhost_apikey": "",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_cafile": "",
|
|
"printhost_password": "",
|
|
"printhost_port": "",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"printhost_user": "",
|
|
"purge_in_prime_tower": "1",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"249"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"template_custom_gcode": "",
|
|
"thumbnails": [
|
|
"430x344"
|
|
],
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"z_hop_types": [
|
|
"Normal Lift"
|
|
]
|
|
}
|