mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
129 lines
3.0 KiB
JSON
129 lines
3.0 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Flashforge Guider 2s 0.4 nozzle",
|
|
"inherits": "fdm_flashforge_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Flashforge Guider 2s",
|
|
"gcode_flavor": "marlin",
|
|
"default_print_profile": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printer_variant": "0.4",
|
|
"printable_area": [
|
|
"-140x-125",
|
|
"140x-125",
|
|
"140x125",
|
|
"-140x125"
|
|
],
|
|
"printable_height": "300",
|
|
"extruder_offset": [
|
|
"-20",
|
|
"10"
|
|
],
|
|
"extruder_clearance_height_to_lid": "70",
|
|
"extruder_clearance_height_to_rod": "23",
|
|
"extruder_clearance_radius": "40",
|
|
"use_relative_e_distances": "0",
|
|
"auxiliary_fan": "1",
|
|
"machine_max_acceleration_e": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3",
|
|
"3"
|
|
],
|
|
"max_layer_height": [
|
|
"0.8"
|
|
],
|
|
"min_layer_height": [
|
|
"0.02"
|
|
],
|
|
"printer_settings_id": "Flashforge",
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retract_before_wipe": [
|
|
"100%"
|
|
],
|
|
"retraction_length": [
|
|
"1"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"retraction_speed": [
|
|
"100"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"single_extruder_multi_material": "0",
|
|
"change_filament_gcode": "",
|
|
"machine_pause_gcode": "M25",
|
|
"default_filament_profile": [
|
|
"Flashforge Generic PLA"
|
|
],
|
|
"machine_start_gcode": "M118 X10 Y10 Z10\nM140 S[bed_temperature_initial_layer_single]; set initial bed temp\nM104 S[nozzle_temperature_initial_layer] T0; set initial extruder temp\nM107; disable cooling fan\nG90; set to absolute positioning\nG28; home axes\nM132 X Y A B; recall home offsets from EPROM\nG1 Z50.0 F420; adjust Z\nG161 X Y F3300\nM7; wait for bed to stabilize\nM6 T0; wait for extruder to stabilize\nM651 S255; start case fan\nG1 Z0.3 F3600; move down to purge\nG92 E0; zero extruders\nG1 X120 Y-125 E20 F2000; extrude a line of filament across the front edge of the bed\nG1 X130 Y-125 F180; wait for ooze\nG1 X140 Y-125 F5000; fast wipe\nG1 Z1 F100; lift\nG92 E0; zero extruders again\nG1 E-1.0000 F1800",
|
|
"machine_end_gcode": "M104 S0 T0; cool down extruder\nM140 S0 T0; cool down bed\nG162 Z F1800\nG28 X Y; home axes\nM132 X Y A B; recall home offsets from EPROM\nM652; turn off rear fan\nG91; set to relative positioning\nM18; disable stepper motors",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"wipe_distance": "2",
|
|
"nozzle_type": "undefine"
|
|
}
|