mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-03 00:02:14 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
187 lines
3.8 KiB
JSON
187 lines
3.8 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "SeeMeCNC TPU",
|
|
"inherits": "SeeMeCNC filament base",
|
|
"from": "System",
|
|
"setting_id": "vsEH0aZOKiLat0hH",
|
|
"filament_id": "SMCFU001",
|
|
"instantiation": "true",
|
|
"filament_settings_id": [
|
|
"SeeMeCNC TPU"
|
|
],
|
|
"compatible_printers": [
|
|
"SeeMeCNC Artemis 0.7 nozzle",
|
|
"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
|
|
"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
|
|
"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
|
|
"SeeMeCNC BOSSdelta 300 0.7 nozzle",
|
|
"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
|
|
"SeeMeCNC RostockMAX v4 0.7 nozzle"
|
|
],
|
|
"compatible_printers_condition": "",
|
|
"compatible_prints": [
|
|
"0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
|
|
"0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC Artemis 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7",
|
|
"0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7"
|
|
],
|
|
"compatible_prints_condition": "",
|
|
"close_fan_the_first_x_layers": [
|
|
"999"
|
|
],
|
|
"cool_plate_temp": [
|
|
"60"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"enable_overhang_bridge_fan": [
|
|
"0"
|
|
],
|
|
"eng_plate_temp": [
|
|
"60"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"35"
|
|
],
|
|
"fan_max_speed": [
|
|
"60"
|
|
],
|
|
"fan_min_speed": [
|
|
"35"
|
|
],
|
|
"filament_cost": [
|
|
"35"
|
|
],
|
|
"filament_density": [
|
|
"1.22"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"4"
|
|
],
|
|
"filament_notes": [
|
|
"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n 0.7mm nozzle: 0.4571\n\nRostockMAX v3.2 / v4:\n 0.7mm nozzle: 0.5473\n\nBOSSdelta 0505:\n 0.7mm nozzle: 0.6117\n - Expect significant tuning required\n\nBOSSdelta 0510:\n Not recommended for TPU.\n\nBOSSdelta 0521:\n Not recommended for TPU.\n\nRun OrcaSlicer PA calibration to fine-tune for your setup.\n\nNote: TPU profiles are designed for 0.7mm nozzles only."
|
|
],
|
|
"filament_type": [
|
|
"TPU"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"999"
|
|
],
|
|
"hot_plate_temp": [
|
|
"60"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"internal_bridge_fan_speed": [
|
|
"-1"
|
|
],
|
|
"nozzle_temperature": [
|
|
"200"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"200"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"230"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"190"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"50%"
|
|
],
|
|
"pressure_advance": [
|
|
"0.8"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"0"
|
|
],
|
|
"slow_down_for_layer_cooling": [
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"25"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"20"
|
|
],
|
|
"supertack_plate_temp": [
|
|
"35"
|
|
],
|
|
"supertack_plate_temp_initial_layer": [
|
|
"35"
|
|
],
|
|
"temperature_vitrification": [
|
|
"60"
|
|
],
|
|
"textured_cool_plate_temp": [
|
|
"60"
|
|
],
|
|
"textured_cool_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"textured_plate_temp": [
|
|
"60"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"filament_retraction_length": [
|
|
"6"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"30"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"25"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"15"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"0.5"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"0"
|
|
],
|
|
"filament_z_hop": [
|
|
"0.3"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"Normal Lift"
|
|
],
|
|
"filament_retract_lift_above": [
|
|
"0"
|
|
],
|
|
"filament_retract_lift_below": [
|
|
"0"
|
|
],
|
|
"filament_retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"30"
|
|
],
|
|
"keep_fan_always_on": [
|
|
"0"
|
|
]
|
|
}
|