mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-25 03:42:05 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
59 lines
1.8 KiB
JSON
59 lines
1.8 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Prusament PVB @XL",
|
|
"inherits": "fdm_filament_pvb",
|
|
"from": "system",
|
|
"setting_id": "RF55nfxQwqUqe00Q",
|
|
"instantiation": "true",
|
|
"nozzle_temperature_intial_layer": "215",
|
|
"nozzle_temperature": "215",
|
|
"hot_plate_temp_initial_layer": "75",
|
|
"hot_plate_temp": "75",
|
|
"slow_down_min_speed": "15",
|
|
"filament_flow_ratio": [
|
|
"1"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"8"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"10"
|
|
],
|
|
"fan_max_speed": [
|
|
"100"
|
|
],
|
|
"fan_min_speed": [
|
|
"100"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"100"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"1"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"3"
|
|
],
|
|
"filament_loading_speed_start": "50",
|
|
"filament_loading_speed": "10",
|
|
"filament_unloading_speed_start": "100",
|
|
"filament_unloading_speed": "100",
|
|
"filament_load_time": "10.5",
|
|
"filament_unload_time": "8.5",
|
|
"filament_cooling_moves": "2",
|
|
"filament_cooling_initial_speed": "10",
|
|
"filament_cooling_final_speed": "3.5",
|
|
"filament_retract_lift_below": "0.6",
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
|
],
|
|
"compatible_printers": [
|
|
"Prusa XL 0.25 nozzle",
|
|
"Prusa XL 0.3 nozzle",
|
|
"Prusa XL 0.4 nozzle",
|
|
"Prusa XL 0.5 nozzle",
|
|
"Prusa XL 0.6 nozzle",
|
|
"Prusa XL 0.8 nozzle"
|
|
]
|
|
}
|