mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-30 20:31:09 +00:00
SoftFever
ade9e77b6b
* Run every profile maintenance job from one tool orca_id_tool.py becomes orca_profile_tool.py, and orca_extra_profile_check.py and orca_filament_lib.py fold into it as subcommands: check, generate-id, fix, trim, update-index and update-snapshot. The three scripts already overlapped -- the checker imported half of its rules from the id tool, which in turn kept a copy-pasted set of output helpers to avoid the resulting import cycle -- while disagreeing on how a vendor is enumerated, how a JSON file is read and what the exit code means. One file settles all three. check, normalize, trim and update-index reproduce their predecessors exactly; normalize and update-index were diffed byte-for-byte against the old scripts over a copy of the whole tree. Deliberate changes: the compatible-printers check no longer switches itself off when --check-materials is passed, an error exits 1 rather than -1, update-index honours --profile-type and reports a profile it cannot place instead of dropping it from the index, fix and update-index gained --dry-run, trim keeps an unindexed file some surviving profile still inherits from, and vendors are enumerated as directories with an index -- which is why blacklist.json, a data file that an unscoped index rebuild once wrote four empty list sections into, loses them here and will not collect them again. The dead rename_filament_system() helper is gone. The suite under scripts/tests now covers the maintenance commands too, and CI runs it; nothing there ran in CI before. No shipped profile data changes apart from those four keys. * update vendor index files with "python3 ./scripts/orca_profile_tool.py update-index" and "python3 ./scripts/orca_profile_tool.py normalize"
30 lines
942 B
JSON
30 lines
942 B
JSON
{
|
|
"type": "process",
|
|
"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
|
|
"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
|
|
"inherits": "fdm_process_elegoo_06030",
|
|
"from": "system",
|
|
"setting_id": "mMP6cZhv9TYjYlEh",
|
|
"instantiation": "true",
|
|
"default_acceleration": "3000",
|
|
"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
|
|
"initial_layer_acceleration": "1000",
|
|
"make_overhang_printable_angle": "90",
|
|
"outer_wall_acceleration": "2000",
|
|
"resolution": "0.05",
|
|
"thick_internal_bridges": "0",
|
|
"top_shell_layers": "4",
|
|
"travel_speed": "300",
|
|
"detect_thin_wall": "0",
|
|
"bridge_speed": "50",
|
|
"sparse_infill_speed": "250",
|
|
"initial_layer_infill_speed": "80",
|
|
"initial_layer_speed": "55",
|
|
"internal_solid_infill_speed": "200",
|
|
"overhang_3_4_speed": "25",
|
|
"print_flow_ratio": "1.0",
|
|
"compatible_printers": [
|
|
"Elegoo OrangeStorm Giga 0.6 nozzle"
|
|
]
|
|
}
|